|
Everlast I-MIG series
The Everlast I-MIG series of invertor mig welders are designed to suit everyone's needs. Whether you are the home hobbyist that is looking for a mig welder for light fabrication work or agricultural repairs, our I-MIG 200 is the ideal mig welder for your needs, with the capability of welding 3/8" metal in a single pass |
| |
Everlast I-MIG 205
The Everlast I-MIG 205 steps it up a notch in the mig welder category allowing professional fabrication shops or the dedicated hobbyist the versatility to cover a wide range of metal thicknesses, with the capability of welding 1/2" metal in a single pass.
|
| |
Everlast I-MIG 250P
The Everlast I-MIG 250P pulse mig welder is and industrial mig welder at an affordable price. This mig welder features fully adjustable parameters with burn back and arc force controls and infinite voltage and wire speed adjustments.
|
|
|
| |
Mig Welder |
|
Inveter Type |
|
Processes |
|
Input Voltage/Phase |
|
Rated Output Amps @ Duty Cycle |
|
Rated Max Volts |
|
Roll Size |
|
Standard Wire Diameter |
|
Spool Gun Ready |
|
Recommended Maximum Metal Thickness single pass |
|
Typical Use |
|
|
Power IMIG 140 |
|
IGBT |
|
GMAW |
|
110V 1 Phase
|
|
135A @ 35% |
|
20.8V @ 140A |
|
2-12 lbs |
|
.030-.045" |
|
No |
|
1/4" |
|
Hobbyists, Automotive, HVAC, General Repair, Fabrication |
|
| Power I-MIG 200 |
|
IGBT |
|
GMAW/ SMAW |
|
220V 1 Phase
|
|
160A @ 35% |
|
24V @ 200A |
|
2-12 lbs |
|
.030-.045" |
|
Yes |
|
3/8" |
|
Hobbyists, Automotive, HVAC, Light Industrial, Fabrication, Motorsports, General Repair, Agricultural |
|
|
|
Power I-MIG 205 |
|
IGBT |
|
GMAW/ SMAW |
|
220V 1 Phase
|
|
200A @ 35% |
|
25V @ 215A |
|
30-44 lbs |
|
.030-.045" |
|
Yes |
|
1/2" |
|
Automotive, HVAC, Industrial, Commercial, Fabrication, Motorsports, General Repair, Maintenance, Agricultural |
|
| Power I-MIG 205 p |
|
IGBT |
|
GMAW-P/SMAW
|
|
220V
1 Phase
|
|
200A @ 35% |
|
24V @ 200A |
|
30-44 lbs |
|
.030-.045" |
|
YES |
|
1/2" |
|
Automotive, Industrial, Fabrication, Motorsports, General Repair, Maintenance, Agricultural |
|
|
|
Power I-MIG 250 p |
|
IGBT |
|
GMAW-P/
SMAW
|
|
220V 1 Phase
|
|
250A @ 35% |
|
26.5V @ 250A |
|
30-44 lbs |
|
.030-.045" |
|
No |
|
1/2" |
|
Automotive, Industrial, Commercial Fabrication, Motorsports, General Repair, Maintenance, Agricultural |
|
|
|
Welders used for Gas Metal Arc Welding are often referred as MIG welders.
This is a kind of welding that is a generally used in a high deposition rate
welding process. We can say that MIG welding is a semiautomatic welding
process. Benefits of MIG welding are capability in all positions with higher
deposition rates than the Shielded Metal Arc Welding. The products we offer
under MIG Welders are Power I-MIG 200, Power I-MIG 205 and Power I-MIG 250P.
Power I-MIG 200 is designed for hobbyists, automotive, HVAC, light
industrial, fabrication, motorsports, general repair and agricultural works.
The Input Voltage/Phase need for this is 240V 1phase. The recommended
maximum metal thickness single pass is 3/8" and the standard wire diameter
is 0.23-0.30".
Power I-MIG 205 is designed for automotive, HVAC, industrial, commercial,
fabrication, motorsports, general repair, maintenance and agricultural
purposes. The Input Voltage/Phase need for this is 240V 1phase. The
recommended maximum metal thickness single pass is 1/2" and the standard
wire diameter is 0.30-0.40".
Power I-MIG 250 p is designed to serve automotive, industrial, commercial
fabrication, motorsports, general repair, maintenance and agricultural
purposes. The recommended maximum metal thickness single pass is 1/2" and
the standard wire diameter is 0.30-0.40".
|
|
