|
Everlast has a wide range of plasma cutters to suit everyone's needs. Starting with our SuperCut50P MOSFET plasma cutter that is ideal for the weekend hobbyist followed by our complete line of IGBT plasma cutters ranging from 50amp to 100amp known as our PowerPlasma series. New to the PowerPlasma series is the PowerPlasma60C a unit specifically designed for CNC use. |
|
| |
PowerPlasma Series |
|
Inverter Type |
|
Voltage/Phase |
|
Start Type |
|
Pilot Arc |
|
Gouge* |
|
Recommended maximum cut @ 10-12 ipm in steel.** Decrease by 25-30% for Aluminum |
|
Maximum severance cut @ 3 ipm in steel |
|
Typical Use |
|
| SuperCut 50P |
|
Toshiba/Fuji Mosfet |
|
120/240 V 1phase |
|
High Frequency |
|
YES |
|
NO |
|
5/8" |
|
3/4" |
|
Hobbyist, Artist, Automotive |
|
| PowerPlasma 50 |
|
Infineon IGBT |
|
240 V 1 phase (120/240 optional) |
|
Blowback type Non-HF |
|
YES |
|
Light |
|
3/4" |
|
1" |
|
Automotive, General Repair, Light Industrial, Fabrication, HVAC |
|
|
| PowerPlasma 60 |
|
Infineon IGBT |
|
240V 1 phase |
|
High Frequency |
|
YES |
|
Light |
|
7/8" |
|
1 1/4" |
|
Automotive, General Repair, Industrial and Commercial, Fabrication Shop, HVAC, Agricultural |
|
| PowerPlasma 60C |
|
Infineon IGBT |
|
220/240 V 3 phase |
|
High Voltage |
|
YES |
|
NO |
|
1" |
|
1 1/4" |
|
Automotive, Fabrication Shop, Industrial and Commercial, Agricultural |
|
|
| PowerPlasma 70 |
|
Infineon IGBT |
|
240V 1 phase |
|
High Frequency |
|
YES |
|
Light |
|
1 1/8" |
|
1 3/8" |
|
General Repair, Industrial and Commercial, Fabrication /Machine Shop, Agricultrual |
|
| PowerPlasma 80 |
|
Infineon IGBT |
|
240V 1/3 phase |
|
High Frequency |
|
YES |
|
Light |
|
1 1/4" |
|
1 1/2" |
|
General Repair, Industrial and Commercial, Fabrication/Machine Shop, Agricultural |
|
|
| PowerPlasma 100 |
|
Infineon IGBT |
|
220/240 V 3 phase |
|
High Frequency |
|
YES |
|
YES |
|
1 1/2" |
|
1 7/8" |
|
Industrial and Commercial |
|
|
|
* For Gouging, consult Everlast for special gouging torch and accessories.
* * Piercing capacity is typically 40-50% of recommended cut capacity.
|
Plasma cutters are the tools intended and made for cutting metals, such as stainless steel and aluminum. These tools make use of the latest techniques to cut a metal accurately as needed. With these tools any kind of tough and heavy metals can be sliced effortlessly within a very short span of time.
We offer a variety of different models to suit your needs whether you are a home hobbyist who enjoys fabricating parts on the weekends or a fabrication shop with the need for a full time plasma cutter operation on a daily basis to heavier industrial applications that need the power of a 80 ampin single or 3 phase as well as the 3 phase 100 amp Plasma Cutter, here at Everlast we have the right model for you.
We offer our economical Toshiba MOSFET SuperCut 50P Plasma with Pilot Arc Start as our hobbyist model with the option of the PowerPlasma 50 IGBT Pilot Arc Start for the more serious user that needs more power to get them through the day.
For greater cutting performance we also offer the Power Plasma series in 60 amps to 100amps to cover just about any application that may be required of them, this year saw the addition of the PowerPlasma 60C to the lineup as a CNC dedicated unit.
|
|
