THIS WEBSITE IS UNDER CONSTRUCTION AND WE CANNOT GUARANTEE THE ACCURACY OF INFORMATION PROVIDED. PLEASE CONTACT EVERLAST AT 905-637-1637 DURING OUR BUSINESS HOURS FOR ACCURATE QUOTES.

Power I-MIG 210

Power I-MIG 210
CA$1,200.00

Availability: In stock

Click on above image to view full picture

Details

Power I MIG 210 CC/CV inverter: MIG/MAG/Stick Welder
Processes: GMAW / SMAW

-GMAW/SMAW operation (MIG/Stick)
-50% duty cycle
-Twin cooling fans
-Spot & Stitch timers
-Burn back control
-Cast aluminum heavy duty 2 roll wire feeder
-Euro quick connect 24 series MIG gun (Binzel/Trafimet compatable)
-Arc force control useful for fine tuning arc characteristics in MIG and Stick
-Dual digital display allows precise and repeatable setting of welding parameters
Holds up to a 12" roll of welding plus an adaptor of an 8" spool is included
-Dual voltage 120/240V
Digitally controlled IGBT Inverter
-Up to 600 IPM wire feed speed

.
  • 10 ft. (3m) 24 series MIG gun with Euro quick-connect
  • Workclamp with cable
  • Ar/CO2 Regulator
  • Spare Contact Tip

Optional Equipment: 


  • Welding cart
  • 15-25 ft MIG gun ( 25, 24, or 36 series)
  • Spool gun

Minimum/Maximum: 


  • MIG:
  • Weld up to a maximum of 3/8" in a single pass weld* 240V
  • Weld up to 5/8" in multiple pass weld 240V
  • Weld a minimum of 24 gauge 120/240V
  • Weld a maximum of 1/8" single pass on 120V
  • Weld a maximum of 1/4" multi-pass on 120V

*Single pass welds greater than 1/4" are not generally recommended as a sound welding technique.

 Min MIG welds are same 120V or 240V.

Stick:

  • Weld with an electrode with a minimum diameter of 1/16" 120/240V
  • Weld with an electrode with a maximum diameter of 5/32" 240V
  • Weld with an electrode with a maximum diameter of 3/32" 120V

Stick maximum electrode capabiility is ultimately dependant upon electrode type and electrode manufacturer recommendation.

This unit is not recommended for E6010 use. 

For Aluminum, use spool gun.

Type: 
Digital/Micro-controlled IGBT Inverter
Output /Process Type: 
MIG, Stick
Voltage/phase: 
220/240 V 1 PHASE
Max Rated MIG Amps: 
  • @120V: 125A

  • @240V:  210A

Max Rated Stick Amps: 
  • @120V: 100A

  • @ 240V: 160A

MIG Amps/Volts @ Rated Duty Cycle: 

120V:


  • 125A/20.3V @ 50% Duty Cycle/40 º C

  • 115A/19.8V @ 60% Duty Cycle/40 º C

  • 90A/18.5V @ 100% Duty Cycle/40 º C

 


240V:


  • 210A/26.4V @ 50% Duty Cycle/40º C

  • 195A/23.8V @ 60% Duty Cycle/40º C

  • 150A/21.5V @ 100% Duty Cycle/40º C

 


Stick Amps/Volts @ Rated Duty Cycle: 

120V:


  • 100A/24V @ 50% Duty Cycle/ 40 º C

  • 90A/23.6V @ 60% Duty Cycle/40 º C

  • 70A/22.8V @ 100% Duty Cycle/40 º C

240V:


  • 160A/26.4V @ 50% Duty Cycle/ 40º C

  • 150A/26V @ 60% Duty Cycle/ 40º C

  • 115A/24.6V @ 100% Duty Cycle/ 40º C

 


Max Inrush ( I1MAX ) Amps: 
  • @120V: 33A

  • @240V: 36A

 


Maximum Rated (I1EFF ) Input Amps: 
  • @120V: 23.6A

  • @240V: 25.8V

OCV: 

60V


MIG Output Range: 
  • @120V: 30A-125A/15.5V-20.3V

  • @240V: 30A-210A/ 15.5V-24.5V

Stick Output Range: 
  • @120V:  10A-100A/20.4V-24V

  • @240V:  10A-160A/20.4V-26.4V

Variable MIG Inductance/Stick Arc Force Control: 
Yes
Spool Gun Capable: 
Yes
Pulse: 
No
Standard Drive Roll wire size: 
.030”-.045”
Separate wire feeder: 
No, self contained
Number of Drive rollers: 
2
Max Wire Feed Speed: 

600 IPM


Max Wire Roll Diameter: 
12” (full size up to 44lb)
Weight: 45 lb
Memory: 
No
Preflow time: 

Automatic


Post Flow Time: 

Automatic


Flux Core: 
Yes, Optional
Air Carbon Arc: 
No
2T/4T /Torch latch/Trigger: 
No
Other Features: 
  • 12" Roll Capacity.

  • Volt and Amp Meter

  • Digitally Controlled

  • Spot and Stitch Timer

  • Burn Back control

 


GMAW/SMAW Process


Spool gun optional. Use spool gun for welding aluminum.


This unit not recommended for use with E6010


Spot and Stitch timer controls
Disclaimer: "Units and accessories may not be exactly as pictured"