THIS WEBSITE IS UNDER CONSTRUCTION AND WE CANNOT GUARANTEE THE ACCURACY OF INFORMATION PROVIDED. PLEASE CONTACT EVERLAST AT 905-637-1637 DURING OUR BUSINESS HOURS FOR ACCURATE QUOTES.

Power IMIG 140 E

Power IMIG 140 E
CA$500.00

Availability: In stock

Click on above image to view full picture

Details

Power I-MIG Series CC/CV inverter: MIG/ MAG Processes: GMAW 110/120 V

- Inverter design lowers weight & power consumption while increasing duty cycle and arc performance
- Stepless control of both the wire speed and voltage
- Durable IGBT components offer longer life
- Stable smooth arc with good wet in characteristics
- 120V input design allows the unit to be used almost anywhere you have access to a 30amp outlet
-Sturdy drive mechanism

-Standard drive rolls can feed .023" - .030" wire

-Designed to be used with 4" and 8" wire spools

.
Standard Equipment: 

  • 10 Ft. (3m) 15 Series MIG gun
  •  Work clamp
  • Ar/CO2 Regulator
  • Consumable start kit
Optional Equipment: 
  • Welding Cart
  • Consumable Kit
  • Spool Gun
Minimum/Maximum: 

  • Up to maximum of 3/16" single pass steel/stainless/aluminum
  • Up to maximum of 3/8" multiple pass steel/stainless/aluminum
  • Minimum of 24 gauge cabability

Use a spool gun to weld Aluminum.

Type: 
Analog IGBT Inverter
Output /Process Type: 
MIG
Voltage/phase: 
120V
Max Rated MIG Amps: 

140A


MIG Amps/Volts @ Rated Duty Cycle: 
  • 140A/21V  @ 25% Duty Cycle/40º C

  • 90A/18.4V @ 60% Duty Cycle/40º C

  • 70A/17.5V @ 100% Duty Cycle/40º C

 


Max Inrush ( I1MAX ) Amps: 

38.6A


Maximum Rated (I1EFF ) Input Amps: 

19.5A


OCV: 

60V


MIG Output Range: 

25A-140A/15.3V-21V


Variable MIG Inductance/Stick Arc Force Control: 
No
Spool Gun Capable: 
Yes
Standard Drive Roll wire size: 
.023”-.030”
Separate wire feeder: 
No, self contained
Number of Drive rollers: 
2
Max Wire Roll Diameter: 
8” (up to 12 lb)
Weight: 28 lb
Memory: 
No
Preflow time: 

Fixed


Post Flow Time: 

Fixed


Flux Core: 
Yes, Optional
Other Features: 

Binel/Trafimet 15 series Gun (appearance may vary from depicted)


Product Notes:



IGBT Inverter MIG 25-140A PROCESS: GMAW



For use with a generator, make sure that the generator is rated by the generator manufacturer as "clean power", which is less than 5% Total Harmonic Distortion (THD). Use with a generator rated for at least 4800 surge watts for maximum 140A output.



This unit does not come equipped with Flux Core drive rolls. For flux core use, purchase drive roller separately under "MIG Parts"



For Maximum output on 120V, use a delay trip breaker or slow blow fuse rated for 30 amps or tripping of the breaker will occur.


Disclaimer: "Units and accessories may not be exactly as pictured"