PowerARC 210STL
The PowerARC 210STL offers features that will appeal to the professional welder. The 200 amp PowerArc 210STL is 6010/cellulose compatibe with the touch of a button on the digital face of the unit. (Short Arc) This compact IGBT inverter welder cuts no corners on performance or design. In both the 6010 and standard operating modes, the PowerARC 210STL features fully adjustable hot start and adjustable arc force control, so you can fully adjust the amount of arc control you need. The unit also has VRD for work environments that require voltage reduction. Anti-stick function helps eliminate stuck rods which reduces the chance of arc flash. The PowerARC 210STL has gas solenoid control so there is no need for a valve torch. It will handle an optional pedal or standard torch switch and has 2T and 4T switch options. Live Lift means that your tungsten remains live and an arc can be struck anytime the tungsten lifts from the metal. The PowerArc 210STL is 120V/240V dual voltage. For TIG operation, be sure to pick up an optional TIG torch, gas regulator and pedal. (Check out our Accessories Section for these options)
| Features & Benefits | Features & Benefits:
|
|---|---|
| What's Included | Standard Equipment:
|
| Tech Specs | IGBT Type:
Individual IGBT
Inverter Type:
Digital/Micro Controlled
Output Type:
DC Stick, DC TIG
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps:
Max Rated Stick Amps:
TIG Amps @ Rated Duty Cycle:
120V:
240V:
Stick Amps @ Rated Duty Cycle:
120V:
240V:
Max Inrush ( I1MAX ) Amps:
110V: 39.2A Maximum Rated (I1EFF ) Input Amps:
110V: 24.0A OCV:
TIG/Stick 80V Stick Output Range DC:
Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Adjustable Hot Start
6010/Cellulose Capable:
Yes (Short Arc)
Minimum Amp DC TIG Start:
10A TIG Start Type:
Lift TIG/Live Lift Memory:
No
Down Slope Time:
0-5 Seconds
Post Flow Time:
0-10 Seconds
TIG Pulse:
No
Remote Control:
2T/4T
Foot Pedal:
Optional
|
| Minimum Maxmimum | Minimum/Maximum:Stick
TIG*:
*Not for welding Aluminum or Magnesium. Min/Max TIG is based off of industry standard practice for best quality welds. |
| Optional Equipment | Optional Equipment:
|
| Notes | Product Notes: 1) The PowerARC 210STL comes with the stick holder and work clamp. This unit needs a minimum 5500 watts (120V) and 9000 wats (240v) to operate properly. Use with generators certified as clean power by the generator manufacturer (5% total harmonic distortion). Damage cause by operating on generators that are not the proper size and type are not warrantied. French manual currently NOT available. English Manual can be downloaded online. |