PowerTIG 325EXT

In stock
SKU
PT325EXT
CA$3,625.00
TIG Welders

The PowerTIG 325EXT is a digital inverter based welder built for superior industrial performance.  The PowerTIG 325EXT offers up to 320 amps of TIG welding power within a reliable and serviceable platform designed for years of service. For welding aluminum, 325EXT's Advanced Pulse in AC greatly increases penetration while Wave Form Control, AC Frequency and AC Balance Controls combine to ensure an all round positive experience. 

  • HV/HF arc starting: No Points to adjust.
  • Fan on Demand upon arc start (**Water Cooler will still run continously**)

DC functions are not to be ignored. Plenty of features such as standard pulse frequency up to 500 Hz, and a wide range of adjustable 2T/4T functions add to this welder's exceptional capabilities. The standard PowerTIG 325 EXT listed here is 240V, single phase.

(water cooler sold seperately)

More Information
Features & Benefits
Features & Benefits:

  • New Bezel and stackable feature!
  • Spot Timer
  • Digital microprocessor control
  • HV/HF arc starting: No Points to adjust.
  • Fan on Demand upon arc start (**Water Cooler will still run continously**)
  • #20 water cooled included (water cooler sold seperately)
  • IGBT Power Modules
  • True low amp operation down to 5 amps DC and 10 amp AC
  • 2T/4T/ Pedal operation modes with additional 2T/4T mode for torch amptrol operation.
  • Wave form control in AC provides 4 wave forms: Sine, Triangular, Soft Square and Advanced Square Wave
  • Easy Start Up feature in AC or DC modes to make setup quick and easy for the beginner, or the advanced user
  • Pulse up to 500Hz in DC, 250 Hz AC
  • 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals
  • Arc force control, Hot start time, Hot start intensity settings for Stick welding
  • NOVA Pedal
    What's Included

    Standard Equipment:

    • 7.5m Everlast #20 Series (water cooled) TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation
    • 7.5m Everlast #9 Series (air cooled) TIG torch with 35 DINSE style connectors  and torch switch for 2T/4T operation
    • Heavy Duty Stick electrode holder with 3m cable and 35 series DINSE style connectors
    • Heavy Duty Work clamp with 3m Cable and DINSE style connectors
    • NOVA foot pedal
    • Everlast Argon Regulator
    • Basic Consumable Starter Kit (Tungsten not included)
    • 1.8m Power input cable with NEMA 6-50 plug
    Tech Specs

    Tech Specs

    IGBT Type: 
    Module IGBT
    Inverter Type: 
    Digital/Micro-controlled
    Output Type: 
    AC/DC TIG, DC Stick
    Voltage/phase: 
    220/240 V 1/3 PHASE
    Max Rated TIG Amps: 

    320A

    Max Rated Stick Amps: 

    250A

    TIG Amps @ Rated Duty Cycle: 
    • 320A/22.8V @ 35% Duty Cycle/40º C
    • 250A/20V @ 60% Duty Cycle/ 40º C
    • 200A/18V @ 100% Duty Cycle/ 40º C
    Stick Amps @ Rated Duty Cycle: 
    • 250A/30V @ 35% Duty Cycle/ 40º C
    • 200A/28V @ 60% Duty Cycle/ 40º C
    • 160A/ 26.4V @ 100% Duty Cycle/ 40º C
    Max Inrush ( I1MAX ) Amps: 
    • 220V (1):  60A
    • 220V (3): 29A
    Maximum Rated (I1EFF ) Input Amps: 
    • 220V (1): 30A
    • 220V (3): 18A
    OCV: 
    • TIG: 80V
    • Stick: 80V
    TIG Output Range DC: 

    5A-320A/ 10.2V-22.8V

    TIG Output Range AC: 

    10A-320A/ 10.4V-22.8V

    Stick Ouput Range DC: 

    20A-250A/ 20.8V-30V

    Stick Hot Start Amps: 

    Auto regulated

    Stick Function: 
    Adjustable Arc Force Control
    Stick Hot Start Type: 
    Auto Adaptive Hot Start
    Minimum Amp DC TIG Start: 

    10A (+/-2A)

    Minimum Amp AC TIG Start: 

    10A (+/-2A)

    TIG Start Type: 
    • HF
    • Lift TIG
    TIG Start Type: 
    HV/HF and Lift Start
    Start Amp Range: 

    10A-320A

    End Amp Range: 

    10A-320A

    Upslope Time: 

    0-10 Seconds

    Down Slope Time: 

    0-25 Seconds

    Preflow time: 

    0-10 Seconds

    Post Flow Time: 

    0-25 Seconds

    TIG Pulse: 
    Yes
    Standard DC Pulse Frequency: 

    .5-500Hz

    Standard AC Pulse Frequency: 

    .5-250Hz

    Pulse Time On (Duty Cycle): 

    10-90%

    Pulse Amp Range: 

    5-95% of welding amps

    AC Frequency (Hz): 

    20-250Hz

    AC Balance Range: 

    10-90% of Electrode Positive

    AC Wave Forms: 
    • Advanced Square Wave
    • Soft square
    • Triangular
    • Sine (wave)
    6010/Cellulose Capable:
    Yes(Short Arc)
    Remote Control: 
    2T/4T
    Foot Pedal: 
    NOVA
    Minimum Maxmimum

    Minimum/Maximum:

    TIG:

    • Weld steel to a maximum of 1/2" single pass
    • Weld steel to a maximum of 1+" multi-pass
    • Weld aluminum to a maximum of 1/2" single pass
    • Weld aluminum to a maximum of 1+" multi-pass
    • Weld to a minimum of .005" Steel
    • Weld to a minimum of .010" Aluminum

    Stick:

    • Weld with a minimum of 1.6 mm (1/16") diameter electrode
    • Weld with a maximum of 4.8 mm (3/16") diameter electrode
    Stick electrode maximum size is ultimately dependent upon type/class of electrode and manufacturer's recommendation.
    Optional Equipment

    Optional Equipment:

    • Everlast Series Rotating Head TIG Torches
    • Everlast Series Slim Line Flex Neck Series
    • Everlast Series ProFlex Series
    • Amperage Slide Control
    • WC375 Water  Cooler
    • ProCart
    • Welder Cover


     

    Notes

    Product Notes:
    For generator use:  Use only generators that are certified as "clean power" by the manufacturer.  This means that the unit has less than 5% THD (total harmonic distortion)

    (water cooler sold seperately)

    This unit is wired for Single Phase ONLY.

    If you require 3 phase on this unit - It MUST be noted at the point of sale.

    French manual currently NOT available. English Manual can be downloaded online.

    Disclaimer: Units and accessories may not be exactly as pictured. French manuals currently NOT available. English Manual can be downloaded online.