Storm 215C
Everlast continues its tradition of innovation and industry firsts with the new multi-process Storm 215c. This new Multi-Process unit features a unique combination of MIG, Stick and Plasma Cutting processes. A sustantial duty cycle rating of 35% at the maximum rating of 200A MIG, 160A Stick and 40A plasma, means this unit is a serious fabrication and portable repair tool that fits well in home garage, auto-body outlet, fabrication shop or even service truck. With a lengthy list of frequently requested features in each process, the unit offers no compromise performance and adjustability for the professional welder. The compact size of the unit is definitely a shop space saver and lends itself to portable operations as well. The advanced synergic function of the PowerSet mode allows almost any user to quickly set up and attain near perfect settings without having to consult door charts, or calculator apps, making it perfect for the novice welder or for the pro who is in a hurry to get welding. The PowerSet mode will preset Volts, Amps and other features so that you don't have to go through a lengthy setup process. Of course, it does also allow fine tuning of the main settings of Volts and Amps where applicable if you need to make adjustments for differences in welding position and personal welding styles. AK24 North MIG Gun installed with a Red STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/0.045") (subject to change)
For those interested in portable repair operations, the unit requires just 8500 Surge watts of clean (5% or less THD) 240V power to operate from a generator. (Consult generator manufacturer about THD level prior to purchase of generator to confirm that it meets 5% or less THD.)
Features & Benefits | Features & Benefits:
|
---|---|
What's Included | Standard Equipment:
|
Tech Specs | Type:
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, DC Stick, Plasma
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated MIG Amps:
Max Rated STICK Amps:
Max Rated PLASMA Amps:
MIG Amps/Volts @ Rated Duty Cycle:
120V:
240V:
STICK Output Amps/Volts @ Rated Duty Cycle:
120V:
240V:
PLASMA Amps/Volts @ Rated Duty Cycle:
120V
240V
Max Inrush ( I1MAX ) Amps:
Maximum Rated (I1EFF ) Input Amps:
OCV:
MIG Output Range:
120V: 30A-125A/15.5-20.25V 240V: 20A-200A/15.5-24V STICK Output Range :
120V: 10A-100A/20.4-24V 240V: 10A-160A/20.5V-26.4V PLASMA Output Range :
120V: 20A-25A/88-90V 240V: 20A-40A/88-96V Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes, Optional. (Not Included)
Pulse:
NO
Standard Drive Roll wire size:
.030”-.035”
Separate wire feeder:
No, self contained
Number of Drive rollers:
2
Max Wire Feed Speed:
600 IPM Max Wire Roll Diameter:
8” (up to 12 lb)
Memory:
No
Upslope Time:
0-1S Down Slope Time:
0-1S Preflow time:
Auto/0-10S Post Flow Time:
Auto/0-10S Flux Core:
Yes, Optional
2T/4T/Torch latch/Trigger:
Yes
Plasma Cutter Arc Start Type:
Blow Back (Piston Type)
Pilot Arc:
Yes
Torch Type:
Innotec iPT 40 - 4m (S45 Consumables)
Recommended Cutting Air Pressure:
65-72 While Cutting
Recommended Compressor Capacity:
20 Gallon, 4.5CFM @ 90 PSI
OK-to-Cut Indicator/Low Air Pressure Safety::
Yes
Other Features:
PowerSet More for Synergic Operation
BurnBack Timer
Suggested Wire Sizes .023" - .045"
This unit is not designed to weld with E6010 Electrodes.
|
Minimum Maxmimum | MIG Weld:
Weld up to a maximum of 3/16" Multi-pass weld 120V Stick Weld:
NOTE: This unit is not designed to weld E6010 electrodes. Use E6011 instead. Plasma Cut:
Plasma cutting quality + capacity is affected by several factors. |
Optional Equipment | Optional Equipment:
|
Notes | Product Notes: Minimum Generator Wattage needed for maximum output on 240V: 8500 W NOTE: Use only with a generator rated by its manufacturer as "clean power" if using with a generator. Consult manufacturer of generator for certification. Everlast does not approve or endorse generator brands or models, however, if the damage to the welder occuring from use with a generator not labeled as producing clean power by its manufacturer is not warrantable. AK24 North MIG Gun installed with a Red STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/0.045") (subject to change) This unit is not recommended for welding with E 6010 electrodes |