PowerCyclone 212
PowerCyclone Series CC/CV inverter: MIG/ MAG/ Stick Welder
Processes: GMAW / SMAW
The new digitally controlled display panel of the Cyclone 212 is intuitively designed with both polarity reminders and a PowerSet Function making setup more simpler than ever. When you plug in, the unit will analyze the input voltage and automatically set and adjust the machine's output capabilities, and display a input voltage reminder to you should you forget what power level you are operating on. This is important when switching between welding operations such as MIG to Flux-Cored welding, or vice versa where polarity does change and are critical to the correct performance of the welder. The PowerSet function allows both new and professional users to operate at ease, without having to look up or second guess a setting choice. This application also takes the user's input of wire thickness, metal type and plate thickness to offer the user an excellent starting point for parameters. The adjustability built into the PowerSet mode allows the user to dial-in the settings up or down to suit the demands of job.
Cyclone 212 is aimed squarely at the 200A class MIG market by providing a solid 35% duty cycle at 200A. The large colour display is easy to see and stands out in brighter light conditions. With clear and intuitive function control and an exclusive PowerSet function, setup takes seconds after switching the unit on. AK24 North MIG Gun installed with a Red STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/0.045") (subject to change)
Our Cyclone 212 performs like a bigger welder than it really is thanks to the powerful, yet space-saving design that is provided by the modern digital IGBT inverter construction. As both a MIG welder and a Stick welder, the Cyclone 212 takes advantage of every inch of it's new space-saving design by providing up to 230A of MIG output while offering the capability to weld with either 8" (10-12 lb) or 4" (2 lb) spools of wire.
| Features & Benefits | Features & Benefits:
|
|---|---|
| What's Included | What's Included:
|
| Tech Specs | Type:
LCD Screen
Output /Process Type:
MIG, Stick
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated MIG Amps:
Max Rated Stick Amps:
MIG Amps/Volts @ Rated Duty Cycle:
@120V
@240V
Stick Amps/Volts @ Rated Duty Cycle:
120V:
240V:
Max Inrush ( I1MAX ) Amps:
Maximum Rated (I1EFF ) Input Amps:
OCV:
60V MIG Output Range:
Stick Output Range:
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes, Optional (MTS) (Not Included)
Pulse:
No
Standard Drive Roll wire size:
.030”-.035”
Separate wire feeder:
No, self contained
Number of Drive rollers:
2
Max Wire Feed Speed:
600 IPM Max Wire Roll Diameter:
8” (up to 12 lb)
Weight:
50lbs
Memory:
No
Preflow time:
0 -10 seconds, or Auto Post Flow Time:
0 -10 seconds, or Auto Flux Core:
Yes, Optional
Spot Timer:
0-15 Seconds
Stitch Timer:
0-15 Seconds
Other Features:
|
| Minimum Maxmimum | Minimum/Maximum:
A MTS spool gun is required for Aluminum usage, alternatively you may purchase an Aluminum Roller with a Teflon Liner with a standard 3m MIG Gun.
Stick:
This unit is not recommended for use with E6010.
Maximum electrode diameter is ultimately dependent upon rod type and electrode manufacturer recommendations |
| Optional Equipment | Optional Equipment:
|
| Notes | Product Notes: If using with a generator, the generator must be rated by its manufacture as clean power. This means that the Total Harmonic Distortion (THD) is 5% or less. When using with a generator, failure to use a clean power generator properly rated for the wattage required will void the generator's warranty. This unit's maximum output is 230A @ 15% duty cycle, however at 200A the unit's duty cycle increases to 35%. AK24 North MIG Gun installed with a Red STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/0.045") (subject to change)
|