Power I-MIG 230i

Power I-MIG 230i

Regular Price: CA$1,550.00

Special Price: CA$1,500.00

Availability: In stock

Click on above image to view full picture

Power I MIG 230i CC/CV inverter: MIG/MAG/Stick Welder
Processes: GMAW / SMAW

Features & Benefits:

  • GMAW/SMAW operation (MIG/Stick)
  • 50% duty cycle
  • Twin cooling fans
  • Spot & Stitch timers
  • Burn back control
  • Euro quick connect 24 series MIG gun (Binzel/Trafimet compatable)
  • Arc force control useful for fine tuning arc characteristics in MIG and Stick
  • Dual digital display allows precise and repeatable setting of welding parameters
  • Holds up to a 12" roll of welding plus an adaptor of an 8" spool is included
  • E6010 capable with 2 stick settings
  • HD 4 roller gear driven wire feed
  • Dual voltage 120/240V
  • Digitally controlled IGBT Inverter
  • Up to 600 IPM wire feed speed

Recommended Areas Of Use:

  • Home shop
  • Automotive/Muffler shops
  • HVAC
  • Fabrication
  • Farm
  • Motorsports/Speed Shops
  • Portable Repair
  • Small production

Recommended Metals: 

  • Mild steel
  • Stainless steel
  • Chrome-moly
  • Aluminum (with optional spool gun only)

Standard Equipment:

  • 3m, 24 series MIG gun with Euro quick-connect
  • Workclamp with cable
  • Ar/CO2 Regulator
  • Spare Contact Tip

Optional Equipment:

  • Welding cart
  • 15-25 ft MIG gun ( 25, 24, or 36 series)
  • Spool gun



  • Weld up to a maximum of 7/16" in a single pass weld* 240V
  • Weld up to 3/4" in multiple pass weld 240V
  • Weld a minimum of 24 gauge 120/240V
  • Weld a maximum of 1/8" single pass on 120V
  • Weld a maximum of 1/4" multi-pass on 120V


  • Weld with an electrode with a minimum diameter of 1/16" 120/240V
  • Weld with an electrode with a maximum diameter of 5/32" 240V
  • Weld with an electrode with a maximum diameter of 3/32" 120V

For Aluminum, use optional spool gun. (Uses MTS version of gun)

Digital/Micro-controlled IGBT Inverter
Output /Process Type: 
MIG, Stick
Max Rated MIG Amps: 
  • @120V: 125A

  • @240V:  230A

Max Rated Stick Amps: 
  • @120V: 100A

  • @ 240V: 180A

MIG Amps/Volts @ Rated Duty Cycle: 


  • 125A/20.3V @ 50% Duty Cycle/40 º C

  • 115A/19.8V @ 60% Duty Cycle/40 º C

  • 90A/18.5V @ 100% Duty Cycle/40 º C



  • 230A/25.5V @ 50% Duty Cycle/40º C

  • 200A/24V @ 60% Duty Cycle/40º C

  • 160A/22V @ 100% Duty Cycle/40º C


Stick Amps/Volts @ Rated Duty Cycle: 


  • 100A/24V @ 50% Duty Cycle/ 40 º C

  • 90A/23.6V @ 60% Duty Cycle/40 º C

  • 70A/22.8V @ 100% Duty Cycle/40 º C


  • 180A/27.2V @ 50% Duty Cycle/ 40º C

  • 160A/26.4V @ 60% Duty Cycle/ 40º C

  • 130A/25.2V @ 100% Duty Cycle/ 40º C


Max Inrush ( I1MAX ) Amps: 
  • @120V: 30A

  • @240V: 38A


Maximum Rated (I1EFF ) Input Amps: 
  • @120V: 22A

  • @240V: 27V



MIG Output Range: 
  • @120V: 30A-125A/15.5V-20.3V

  • @240V: 30A-230A/ 15.5V-25.5V

Stick Output Range: 
  • @120V:  10A-100A/20.4V-24V

  • @240V:  10A-180A/20.4V-27.2V

Variable MIG Inductance/Stick Arc Force Control: 
Spool Gun Capable: 
Standard Drive Roll wire size: 
Separate wire feeder: 
No, self contained
Number of Drive rollers: 
Max Wire Feed Speed: 

600 IPM

Max Wire Roll Diameter: 
12” (full size up to 44lb)
Weight: 75 lb
Preflow time: 


Post Flow Time: 


Flux Core: 
Yes, Optional
Air Carbon Arc: 
2T/4T /Torch latch/Trigger: 
Other Features: 
  • 12" Roll Capacity.

  • Volt and Amp Meter

  • Digitally Controlled

  • Spot and Stitch Timer

  • Hot Start Intensity (Stick)

  • Hot Start Time (Stick)

  • Burn Back control

  • Jog (To feed wire through gun without consuming gas)

  • Test Gas Flow (for setting gas flow rate)


Product Notes:

Spool gun optional. Use spool gun for welding aluminum.
Spot and Stitch timer controls

If used with a generator, the generator must be rated as "clean power" by its manufacturer. Use a generator rated for 9500 watts surge for maximum performance and output of the welder.

Disclaimer: "Units and accessories may not be exactly as pictured"