Power I-MIG 253DPi
The Power i-MIG 253DPi features the latest in inverter based, pulse MIG technology. This welder is ideal for welding aluminum and bronze brazing activities in the automotive industry. It features two types of synergic pulses: Single and Double. In shops such as auto body repair, where new alloys require special welding and brazing processes to repair frames and panels safely, Single Pulse is perfect for control heat and wet in and burn through of heat sensitive metals where HAZ issues are a concern. With Single pulse, increased production speed welds are possible without overmelting, allowing for out of position welding of aluminum. Double pulse features a "stair-stacked" pulse which features the ability to stack the single pulse into two basic layers, helping to form a "stack of dimes" TIG look in the weld. This is ideal for welds where appearance and strength are of equal importance and is required for best possible appearance without resorting to TIG. The unit can also be used in a synergic MIG mode without pulse and a basic non-pulse, non synergic mode as well, where full control over all parameters are possible manually. To prevent crater cracking and cold starts, the unit has several features which include slope up, hot start and down slope. Pre and post flow are standard features as well, which help prevent porosity at the beginning and end of welds where flaws are common. If you find a program you like in a manual setup mode, you can easily save it with the unit's capacity to store 9 major programs. The unit is programmed with a possible 40 different, well designed and tested synergic programs for standard and pulse MIG operation. Companies and individuals who are looking for the consumate professional MIG machine will appreciate the ability to fine tune the arc even while in synergic mode, which is a characteristic of all Everlast synergic capable MIGs. The Power i-MIG 253DPi is competetively prices, making this one of the most affordable and capable pulse MIG welders on the market. There's no longer any need for a company or individual to spend $10,000 or more on a special welding machine to repair modern alloys. The machine can be used to weld aluminum, bronze, steel, or stainless. The Supplied AK36 MIG Gun is installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change) When welding aluminum, the standard gun works well, but an optional spool gun or push-pull gun can be used to feed wire from .030" to .045" in diameter.
| Features & Benefits | Features & Benefits:
|
|---|---|
| What's Included | What's Included:
|
| Tech Specs | Type:
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, Stick
Voltage/phase:
220/240 V 1 PHASE
Max Rated MIG Amps:
250A
Max Rated Stick Amps:
250A
MIG Amps/Volts @ Rated Duty Cycle:
Stick Amps/Volts @ Rated Duty Cycle:
Max Inrush ( I1MAX ) Amps:
45.5A
Maximum Rated (I1EFF ) Input Amps:
36A
OCV:
80V
MIG Output Range:
40-250A/ 16-30V
Stick Output Range:
10-250A/20.4-30V
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes, Optional (Not Included)
Pulse:
Double/Pulse on Pulse
Pulse Frequency:
10-250 Hz Single Pulse Mode, 0-9.9 Hz Double Pulse
Pulse Time On:
Synergically controlled
Pulse Volts:
Synergically controlled with Voltage offset
Standard Drive Roll wire size:
.040" and greater
Separate wire feeder:
No, self contained
Number of Drive rollers:
4
Max Wire Feed Speed:
600IPM
Max Wire Roll Diameter:
12" (full size up to 44lb)
Memory:
Yes
Preflow time:
0-10S
Post Flow Time:
0-10S
Flux Core:
Yes, Optional
2T/4T /Torch latch/Trigger:
Yes
Other Features:
|
| Minimum Maxmimum | Minimum/Maximum:
For MIG welding Aluminum, use the supplied 10 ft MIG gun, U-groove drive rolls and the polymer liner (best choice for shorter distances). For longer required distances, choose between the Parker Push-Pull Gun (Recommended for longer distances) or the Parker 300A (Recommended for small weld quantities/longer distances)
Stick:
|
| Optional Equipment | Options:
|