PowerMTS 275 Lightning
Everlast was the first company in the industry to introduce our PowerMTS 275 Lightning product line featuring MIG/AC/DC TIG and stick function in a compact format with an enclosed, self-contained wire feeder. Remodeled based off our PowerMTS 252. This AC model from Everlast has more power and features, including another AC TIG wave form and spot and stitch timers. Features like Synergic MIG, Pulse TIG, and AC wave form control are a small sample of the wide range of features this unit has to offer. ** Installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
| Features & Benefits | Features & Benefits:
|
|---|---|
| What's Included | Features & Benefits:
|
| Tech Specs | Type:
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, DC TIG, AC TIG, DC Stick
Voltage/phase:
Dual Voltage 120/240 1 PHASE
Max Rated MIG Amps:
Max Rated TIG Amps:
Max Rated Stick Amps:
MIG Amps/Volts @ Rated Duty Cycle:
TIG Output Amps/Volts @ Rated Duty Cycle:
Stick Amps/Volts @ Rated Duty Cycle:
Max Inrush (I1MAX) Amps:
Maximum Rated (I1EFF ) Input Amps:
OCV:
MIG Output Range:
DC Lift TIG Output Range:
Stick Output Range:
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes, Optional. (Not Included)
Pulse:
Single
Pulse Frequency:
No MIG pulse, TIG only.5-150Hz:
Pulse Time On:
TIG: 5-95%
Pulse Volts:
3-95% of TIG Amps
Standard Drive Roll wire size:
.035”-.045”
Separate wire feeder:
No, self contained
Number of Drive rollers:
4
Max Wire Feed Speed:
Max Wire Roll Diameter:
12” (full size up to 44lb)
Memory:
16 programmable
Upslope Time:
Down Slope Time:
Preflow Time:
0-10Seconds
Post Flow Time:
0-10 Seconds
Foot Pedal:
NOVA
Flux Core:
Yes, optional
Air Carbon Arc:
No
2T/4T /Torch latch/Trigger:
Yes
Other Features:
|
| Minimum Maxmimum | MIG:
TIG:
Stick:
|
| Optional Equipment | Optional Equipment:
|
| Notes | Product Notes: NOTE: If using a generator is required, only use a generator rated by its manufacturer as "clean power". Consult manufacturer of generator for certification. Everlast does not approve or endorse generator brands or models. However, if the damage to the welder occurs from use with a generator not labeled as producing clean power by its manufacturer, the welder will not be warrantied. Typically clean power is represented as less than 5% THD. Generator Requirement: 120V: 5500 Watts; 240V: 11 **Supplied AK36 MIG Gun installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
Cart Options:
|
