
SuperUltra 206Si
The MOSFET inverter design of the SuperUltra 206Si, with DC TIG, Stick and Plasma output, keeps things simple and streamlined for the budget-minded welding enthusiast. A new digital control system makes the Super Ultra 206Si more reliable than ever. It's designed to handle occasional welding and plasma cutting jobs around the house or hobby garage. With up to 200 amps of DC TIG welding power, the SuperUltra 206Si has enough power to tackle small steel or stainless repairs that come your way. The unit's built in High Frequency Plasma cutter can easily handle metal cutting projects up to 10 mm - 13 mm (3/8' - 1/2"). As well, the SuperUltra 206Si has enough power in stick mode to handle 6013, 7014 and 7018 rods up to 3mm (1/8") in diameter. The Everlast SuperUltra 206Si is designed for utility use and offers good value for both hobbyists and professionals who need portable, all-in-one welding and cutting capability.
NOTE: The SuperUltra 206Si unit comes with a 1 year warranty for Manufacturer defects and 6 months Manufacturer defects on accessories
DC ONLY. (Will not weld aluminum)
Features & Benefits | Features & Benefits:
|
---|---|
What's Included | Standard Equipment:
|
Tech Specs | Tech Specs IGBT Inverter Type:
MOSFET
Voltage/phase:
Dual Voltage 120/240 1 Phase
TIG output type:
DC Only
TIG Start Type:
High Frequency only
Pulse:
No
Plasma Cutter Arc Start Type:
High Frequency
PilotArc:
Yes
OK-to-Cut Indicator/Low Air pressure safety:
No
AC Frequency:
Not applicable AC Balance (cleaning):
Not applicable OCV:
70V TIG/Stick, 220V Plasma Max Inrush ( I1MAX ) Amps:
Maximum Rated (I1EFF ) Input Amps:
TIG Output Amps/Volts @ Rated Duty Cycle:
120V:
240V:
Stick Output Amps/Volts @ Rated Duty Cycle:
120V:
240V:
Plasma Output Amps/Volts @ Rated Duty Cycle:
120V:
240V:
TIG AC Amp/Volt Range:
TIG DC Amp/Volt Range:
Stick Amp/Volt Range:
Plasma Amp/Volt Range:
Preflow time:
Fixed Post Flow Time:
Adjustable OverCurrent Protection:
Yes Duty Cycle Protection:
Yes Air Pressure OK Safety Indicator:
NO Stick Arc Force Control:
Auto-Adaptive Torch Type:
AG60 High Frequency Recommended Cutting Air Pressure:
55-60 PSI Recommended Compressor Capacity:
4CFM @90 psi/ 20 gallon tank |
Minimum Maxmimum | Minimum/Maximum:TIG:
Stick electrode diameter capability:
Plasma Cutting capability* ( with dry air, new consumables, proper air pressure etc.):
*Quality and capacity of cut depends upon consumable orifice size, standoff height, travel speed, etc. |
Optional Equipment | Optional Equipment:
|
Notes | Product Notes: For generator use: Use only generators that are certified as "clean power" by the manufacturer. This means that the unit has less than 5% THD (total harmonic distortion) |