SuperUltra 206Si

SuperUltra 206Si

Regular Price: CA$850.00

Special Price: CA$750.00

Availability: In stock

Click on above image to view full picture

The MOSFET inverter design of the SuperUltra 206Si, with DC TIG, Stick and Plasma output, keeps things simple and streamlined for the budget-minded welding enthusiast. A new digital control system makes the Super Ultra 206Si more reliable than ever. It's designed to handle occasional welding and plasma cutting jobs around the house or hobby garage.  With up to 200 amps of DC TIG welding power, the SuperUltra 206Si has enough power to tackle small steel or stainless repairs that come your way. The unit's built in High Frequency Plasma cutter can easily handle metal cutting projects up to 10 mm - 13 mm (3/8' - 1/2").  As well, the SuperUltra 206Si has enough power in stick mode to handle 6013, 7014 and 7018 rods up to 3mm (1/8") in diameter.  The Everlast SuperUltra 206Si is designed for utility use and offers good value for both hobbyists and professionals who need portable, all-in-one welding and cutting capability.

NOTE: The SuperUltra 206Si unit comes with a 1 year warranty for Manufacturer defects and 6 months Manufacturer defects on accessories



Features & Benefits:

  • All-in-one portability and affordability
  • Simple TIG welding/Plasma cutting features
  • Compact MOSFET based inverter provides performance, reliability and accuracy
  • Easy to use pad and knob controls for process and feature selection
  • Quick change torches from TIG to plasma and back to TIG
  • HF Plasma cutting with pilot arc function
  • Dual voltage design allows unit to be used almost anywhere
  • Excellent unit for light hobby jobs

Recommended Areas of Use: 

  • Home shops
  • Light portable repairs
  • Small project builds

Recommended Metals: 

  • Steel
  • Stainless
  • Chrome-Moly

Standard Equipment:

  • Everlast Series-26, 4 m TIG torch with DINSE connector
  • Stick electrode holder with DINSE connector
  • AG60, 4 m Plasma Torch with DINSE connector
  • Work clamp with DINSE connector
  • Argon Regulator for TIG
  • Air pressure regulator for plasma with built in water trap (An extra inline air dryer supplied by the customer is recommended to prevent rapid consumable wear and torch damage)
  • Foot pedal
  • 110v adapter
  • Plasma and TIG Consumables starter kits (Tungsten not included for TIG)

Optional Equipment:

  • Welding Cart

Minimum/Maximum:

TIG:

  • Weld steel to a maximum of 5/16" single pass (240V)
  • Weld steel to a maximum of 3/16" single pass (120V)
  • Weld steel to a maximum of 1/2" multi-pass(240V)
  • Weld steel to a maximum of 3/8" multi-pass (120V)
  • Weld to a minimum of .005" Steel

Stick electrode diameter capability:

  • 1/16"-1/8" (3/32 120V)

Plasma Cutting capability* ( with dry air, new consumables, proper air pressure etc.):

  • Up to 1/4" regular use 15-20 ipm (240V)
  • Up to 3/8" clean cut @ 8-12 ipm (240V)
  • Up to 1/2" maximum severance cut (occasional use only) @ 3-5 ipm (240V)
  • Up to 1/8" regular use 15-20 ipm (120V)
  • Up to 3/16" clean cut @ 8-12 ipm (120V)
  • Up to 1/4" maximum severance cut (occasional use only) @ 3-5 ipm (120V)

*Quality and capacity of cut depends upon consumable orifice size, standoff height, travel speed, etc.

Tech Specs
IGBT Inverter Type: 
MOSFET
Voltage/phase: 
Dual Voltage 120/240 1 Phase
TIG output type: 
DC Only
TIG Start Type: 
High Frequency only
Pulse: 
No
Plasma Cutter Arc Start Type: 
High Frequency
PilotArc: 
Yes
OK-to-Cut Indicator/Low Air pressure safety: 
No
AC Frequency: 

Not applicable


AC Balance (cleaning): 

Not applicable


OCV: 

70V TIG/Stick, 220V Plasma


Max Inrush ( I1MAX ) Amps: 
  • 110V:  31A

  • 220V:  27A

Maximum Rated (I1EFF ) Input Amps: 
  • 110V:  19A

  • 220V:  17 A

TIG Output Amps/Volts @ Rated Duty Cycle: 

120V: 


  • 60% @ 93A/13.7V

  • 100% @ 72A/12.9V

240V: 


  • 60% @ 160A/16.4V 

  • 100% @  130A/15.2V

Stick Output Amps/Volts @ Rated Duty Cycle: 

120V: 


  • 60% @ 93A/23.7V

  • 100% @ 72A/22.9V

240V:


  • 60% @ 130A/25.2V

  • 100% @ 100A/24V

Plasma Output Amps/Volts @ Rated Duty Cycle: 

120V:


  • 60% @ 27A/90.8V

240V:


  • 35% @ 50A/ 100V

  • 60% @ 40A/96V

  • 100% @ 30A/ 92V

TIG AC Amp/Volt Range: 
  • 120V:  Not applicable

  • 240V:  Not applicable

TIG DC Amp/Volt Range: 
  • 120V:  10A-120A; 10.4V-14.8V

  • 240V:  10A-200A; 10.4V-18V

Stick Amp/Volt Range: 


  • 120V:  10A-120A; 20.4V-24.8V

  • 240V:  10A-160A; 20.4V-26.4V



Plasma Amp/Volt Range: 


  • 120V:  10A-27A; 84V-94V

  • 240V: 10A-50A; 84V-100V



Preflow time: 

Fixed


Post Flow Time: 

Fixed


OverCurrent Protection: 

Yes


Duty Cycle Protection: 

Yes


Air Pressure OK Safety Indicator: 

NO


Stick Arc Force Control: 

Auto-Adaptive


Torch Type: 

AG60 High Frequency


Product Notes:



NOTE that the warranty on this unit is 1 YEAR on Manufacturer defects, 6 months Manufacturer defects on accessories.



The SuperUltra 206Si is MOSFET based inverter unit, designed as a basic, entry level unit. This unit is not recommended for production welding or fabrication.



The SuperUltra 206Si does not feature pulse. For pulse capable multi-purpose units, consider our Everlast PowerPRO series.



Due to the DC only output in TIG mode, this unit is not suited for TIG welding aluminum.



This unit is not recommended for E6010 use.




When operating on a generator, the generator must be rated by the generator manufacturer as "clean power" which is considered less than 5% total harmonic distortion (THD).


For 120V operation on a generator, use a generator with at least 3800 surge watts output.


For 240V operation on a generator, use a generator with at least 6500 watts output



Disclaimer: "Units and accessories may not be exactly as pictured"