PowerPlasma 50S -110/220V

Out of stock
SKU
PP50S
CA$1,050.00
Plasma Cutters

The PowerPlasma 50S is an IGBT plasma cutter that is capable of cutting 1/2" and can sever up to 3/4" thick steel.  The PowerPlasma 50S offers plenty of capability for the average small fab shop or hobbyist.  The small size lends itself well to portability and is a space saver in the shop or service truck.  The latest generation Everlast PowerPlasma 50S features the Italian designed iPT 60 torch.  This torch is an improvement over the older series of torches.  The new iPT 60 torch (4m) offers improved consumable life, with more competitve pricing for consumables.  The new tip saver function will also help to limit Pilot arc time and extend consumable life.  CNC port is also standard on this unit for cuts up to 1/4".

More Information
Features & Benefits

Features & Benefits:

  • IGBT Inverter Plasma Cutter
  • Dual Voltage 120/240 V for maximum portability
  • Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life
  • Front Mounted air pressure regulator for easy adjustment and monitoring of air pressure
  • Euro style "Central" quick connect torch adapter
  • Features a " blow-back" iPT 60 torch (4m)
  • Inexpensive consumables can usually be bought locally
  • 60% duty cycle is fit for commercial use
  • Exceptionally clean cuts and less bevel with the new iPT 60 torch
  • OverCurrent/Duty Cycle indicators and auto interrupt help protect the machine
  • OK-to-cut indicator/feature indicates when air pressure is sufficient to make a cut, and automatically stops output if  air pressure is too low or has become disconnected
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
  • NOTE: When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD)
What's Included

Standard Equipment:

  • 4m iPT 60 torch
  • Consumable starter kit
  • Water trap (this is not an air dryer)
  • Air Pressure gauge
  • Work clamp
Tech Specs

Tech Specs

Type: 
IGBT
Voltage/phase: 
Dual Voltage 120/240 1 Phase
Output Amp/Volt Range: 
  • 110V: 20A/88V-25A/90V
  • 220V: 20A/88V-50A/100V
OCV: 

200V

Max Inrush ( I1MAX ) Amps: 
  • 110V: 32.1A
  • 220V: 35.8A
Maximum Rated (I1EFF ) Input Amps: 

110V: 24.9A 220V: 27.9A

Duty Cycle At Rated Amps/Volts: 

120V:  60% @ 25A/90V

220V: 60% @ 50A/100V

Arc Start Type: 
Blow Back (Piston type)
PilotArc: 
Yes
Torch Type: 

Italian designed iPT 60

CNC Interface Port: 

Yes

Adjustable Post Flow Timer: 
Yes
Gouging: 
Not Recommended
Recommended Cutting Air Pressure: 

72-75 psi

Recommended Compressor Capacity: 

5.0 cfm or better with 25 gallon tank

OK-to-Cut Indicator/Low Air pressure safety: 
Yes
Minimum Maxmimum

    Minimum/Maximum:

    • Up to 1/2" daily use @ 15-20 ipm
    • Up to 9/16" clean cut @ 8-12 ipm
    • Up to 3/4" severance cut @ 3-5 ipm
    • Up to 1/4" with small CNC table

    Plasma cutting capacity is affected by several factors.  Ideal cutting conditions require dry air, new consumables, proper air pressure etc.  

    Quality of cut depends upon consumable orifice size, standoff height,  and travel speed. 

    Reduce consumable orifice size for best quality cuts on thin metals.  

    Units are shipped with starter kit of consumables designed for 40-50 amps cutting range.

    Options

    Optional Equipment:

    • Consumable Kit
    • Welding Cart
    Notes

    Product Notes:

    • When using the CNC port with a plasma table, the unit should be limited to 40 amps which is the 100% duty cycle level of the machine if it is to be used continuously.
    • A separate air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear.
    • The unit includes a regulator/water trap, but is not designed to remove all water or moisture. 
    • When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD).
    Shipping Cost 50.0000

    Disclaimer: "Units and accessories may not be exactly as pictured"