PowerPlasma 52i

Download Manual

In stock

SKU

PP52i

CA$1,025.00

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

The PowerPlasma 52i is an IGBT plasma cutter that is capable of cutting 1/2" and can sever up to 3/4" thick steel. The PowerPlasma 52i offers plenty of capability for the average small fab shop or hobbyist. The small size lends itself well to portability and is a space saver in the shop or service truck. The latest generation Everlast PowerPlasma 52i is fully digital and features the Italian designed iPT 60i torch. This torch is an improvement over the older series of torches. The new iPT 60 torch (4m) offers improved consumable life, with more competitve pricing for consumables. The new tip saver function will also help to limit Pilot arc time and extend consumable life. CNC port is also standard on this unit for cuts up to 1/4".

More Information

More Information
Features & Benefits	Features & Benefits: IGBT Inverter Plasma Cutter Dual Voltage 120/240 V for maximum portability Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life Euro style "Central" quick connect torch adapter Features a " blow-back" iPT 60i torch (4m) Inexpensive consumables can usually be bought locally 60% duty cycle is fit for commercial use Exceptionally clean cuts and less bevel with the new iPT 60 torch OverCurrent/Duty Cycle indicators and auto interrupt help protect the machine OK-to-cut indicator/feature indicates when air pressure is sufficient to make a cut, and automatically stops output if air pressure is too low or has become disconnected 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear NOTE: When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD) Product Dimensions: 16" x 7" x 12"
What's Included	Standard Equipment: iPT60 - 4m Hand Held Plasma Torch with Euro quick-connect central adapter Work clamp with 1.8m cable and 25 series DINSE style connector Regulator/Water trap (this is not an air dryer) Consumable Starter Kit 1.8m Power input cable with NEMA 6-50 Plug 240/120v Pig Tail Adapter
Tech Specs	Tech Specs Type: IGBT Voltage/phase: Dual Voltage 120/240 1 Phase Output Amp/Volt Range: 110V: 20A/88V-25A/90V 220V: 20A/88V-50A/100V OCV: 200V Max Inrush ( I1MAX ) Amps: 110V: 32.1A 220V: 35.8A Maximum Rated (I1EFF ) Input Amps: 110V: 24.9A 220V: 27.9A Duty Cycle At Rated Amps/Volts: 120V: 60% @ 25A/90V 220V: 60% @ 50A/100V Arc Start Type: Blow Back (Piston type) PilotArc: Yes Torch Type: Italian designed iPT 60i CNC Interface Port: Yes Adjustable Post Flow Timer: Yes Gouging: Not Recommended Recommended Cutting Air Pressure: 72-75 psi Recommended Compressor Capacity: 5.0 cfm or better with 25 gallon tank OK-to-Cut Indicator/Low Air pressure safety: Yes
Minimum Maxmimum	Minimum/Maximum: Up to 1/2" daily use @ 15-20 ipm Up to 9/16" clean cut @ 8-12 ipm Up to 3/4" severance cut @ 3-5 ipm Max Pierce CNC Up to 1/4" Plasma cutting quality + capacity is affected by several factors.
Optional Equipment	Optional Equipment: Consumable Kit Welding Cart
Notes	Product Notes: When using the CNC port with a plasma table, the unit should be limited to 40 amps which is the 100% duty cycle level of the machine if it is to be used continuously. A separate air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture. When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD). Product Dimensions: 16" x 7" x 12"

Compare Products

Remove This Item

You have no items to compare.

My Wish List

Last Added Items

You have no items in your wish list.

PowerPlasma 52i

Minimum/Maximum: