Make a list of everything you want in a plasma cutter. Chances are that you'll come up with a list that matches up pretty closely to the list of features of the Everlast PowerPlasma 60S. It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop. The PowerPlasma 60S is built on an inverter platform, making use of IGBT modules from Infineon (Siemens) to reduce weight, and improve reliability and performance over the individual IGBT design. The unit has plenty of cut capacity with a recommended 9/16" daily cut, a 3/4" clean cut ,1" severance cut and up to 3/8" CNC. The new iPT 60 torch (4m) is part of the standard package and features a proven long life Italian design with blow back start, pilot arc and a variety of consumable choices. The PowerPlasma 60S features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.
|Features & Benefits||
Features & Benefits:
220/240 V 1 Phase
Output Amp/Volt Range:
Max Inrush ( I1MAX ) Amps:
Maximum Rated (I1EFF ) Input Amps:
Duty Cycle At Rated Amps/Volts:
Arc Start Type:
Blow Back (Piston type)
Weight: 58 lb
Italian designed iPT 60
CNC Interface Port:
Adjustable Post Flow Timer:
Light to Medium
Recommended Cutting Air Pressure:
Recommended Compressor Capacity:
6CFM @ 90 psi/ 30 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Plasma cutting capacity is affected by several factors.
Ideal cutting conditions require dry air, new consumables, proper air pressure, etc.
Quality of cut depends upon consumable orifice size, standoff height, and travel speed.
To improve consumable life and prevent torch damage, the customer must supply and install a separate air dryer inline in addition to the regulator/water trap supplied by Everlast. The water trap Everlast supplies with the unit is not designed to remove all moisture from the air.