PowerPlasma 62i
Make a list of everything you want in a plasma cutter. Chances are that you'll come up with a list that matches up pretty closely to the list of features of the Everlast PowerPlasma 62i. It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop. The PowerPlasma 62i is built on an inverter platform, making use of IGBT modules from Infineon (Siemens) to reduce weight, and improve reliability and performance over the individual IGBT design. The unit has plenty of cut capacity with a recommended 9/16" daily cut, a 3/4" clean cut ,1" severance cut and up to 3/8" CNC. The new iPT 60 torch (4m) is part of the standard package and features a proven long life Italian design with blow back start, pilot arc and a variety of consumable choices. The PowerPlasma 62i features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.
Features & Benefits | Features & Benefits:
|
---|---|
What's Included | Standard Equipment:
|
Tech Specs | Tech Specs Type:
IGBT
Voltage/phase:
220/240 V 1 Phase
Output Amp/Volt Range:
20-60A; 88-104V OCV:
240V Max Inrush ( I1MAX ) Amps:
41A Maximum Rated (I1EFF ) Input Amps:
32.4A Duty Cycle At Rated Amps/Volts:
Arc Start Type:
Blow Back (Piston type)
PilotArc:
Yes
Weight: 58 lb
Torch Type:
Italian designed iPT 60i CNC Interface Port:
Yes Adjustable Post Flow Timer:
Yes
Gouging:
Light to Medium | Requires Gouging Consumables (Not Recommended)
Recommended Cutting Air Pressure:
75 psi Recommended Compressor Capacity:
6CFM @ 90 psi/ 30 gallon tank OK-to-Cut Indicator/Low Air pressure safety:
Yes
|
Minimum Maxmimum | Minimum/Maximum:
Plasma cutting quality + capacity is affected by several factors. |
Optional Equipment | Optional Equipment:
|
Notes | Product Notes:
For generator use: Use only generators that are certified as "clean power" by the manufacturer. This means that the unit has less than 5% THD (total harmonic distortion) To improve consumable life and prevent torch damage, the customer must supply and install a separate air dryer inline in addition to the regulator/water trap supplied by Everlast. The water trap Everlast supplies with the unit is not designed to remove all moisture from the air. |