PowerPlasma 82i with CNC Package

Out of stock
SKU
PP82iCNC
Special Price CA$1,875.00 Regular Price CA$2,025.00
Plasma Cutters

The PowerPlasma 82i is now available in a CNC only package. The portability, power, and performance, combine with the price to make the PowerPlasma 82i is one of the best choices available in it's class when you consider power/purchase cost ratios. For routine daily use, the unit is recommended for cutting 5/8" thick plate metal.  And for maximum cut capability on CNC, this unit is capable of producing quality cuts of 1" or greater (at reduced speeds).   Regarding portability, the unit's size is compact and can be easily stored or placed near the work area.  The new iPT 80i CNC torch is rugged and features improved consumable life with the patented "back striking" design.  This blowback design torch comes with a variety of consumable choices, shielded and unshielded.  True it has a professional feel, capability and performance, but it also offers something for the hobbyist, with standard 240V operating input, which makes it right at home in any well equipped home shop plasma table or garage.

More Information
Features & Benefits

Features & Benefits

  • Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
  • Cuts virtually any type of metal with ease
  • Simple to use torches with inexpensive service parts and consumables
  • Commercial/Industrial class, 60% Duty cycle at 80 amps
  • Clean, smooth cuts and improved consumable life with the new iPT 80i CNC torch
  • Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
  • Pilot arc improves performance and cutting on dirty, painted, or rusted metals 
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
  • Adjustable post flow control up to 50 seconds to improve consumable and torch life
  • Front air pressure gauge allows quick verification of air pressure
  • Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
  • IGBT modules improve reliability and performance while reducing overall weight
  • CNC socket and CNC torch for plasma table use.
What's Included

Standard Equipment:

  • 8m iPT 80i CNC torch with Euro quick-connect central adapter
  • Work clamp with DINSE connector
  • Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
  • Consumable starter kit
Tech Specs

Tech Specs

Type: 
IGBT
Voltage/phase: 
220/240 V 1 Phase
Output Amp/Volt Range: 

20-80A/88V-112V

OCV: 

230

Max Inrush ( I1MAX ) Amps: 
  • @220V:  70A
  • @230V: 67A
  • @240V: 64A
Maximum Rated (I1EFF ) Input Amps: 
  • @220V: 58A
  • @230V: 54A
  • @240V: 53A
Duty Cycle At Rated Amps/Volts: 
  • 60% @ 80A/112V
  • 100% @ 63A/105V
Arc Start Type: 
Blow Back (Piston type)
PilotArc: 
Yes
Torch Type: 

Italian designed iPT 80i torch

CNC Interface Port: 

Yes

 

Adjustable Post Flow Timer: 
Yes
Gouging: 
Light to Medium
Recommended Cutting Air Pressure: 

65-75psi

Recommended Compressor Capacity: 

7CFM @ 90 psi/60 gallon tank

OK-to-Cut Indicator/Low Air pressure safety: 
Yes
Amps/Volts @ 60% Duty Cycle: 

80A/ 112V

Minimum Maxmimum

Minimum/Maximum:

  • Up to 3/4" daily use @ 15-20 ipm
  • Up to 3/4" clean cut @ 8-12 ipm
  • Up to 1 1/4" severance cut @ 3-5 ipm

Plasma cutting capacity is affected by several factors. 

Ideal cutting conditions require dry air, new consumables, proper air pressure etc.  

Quality of cut depends upon consumable orifice size, standoff height,  and travel speed.

Options

Optional Equipment:

  • iPT 80i machine torch
  • Welding cart
  • Welder Cover
  • Consumable kit
Notes

Product Notes:

  • A separate inline air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture.
  • If using with a generator, use a generator rated by its manufacturer as providing "clean power".  This is usually 5% or less THD (total harmonic distortion).
  • Use with a generator rated for at least a minimum of 15,000 surge watts.
  • This unit does not include a hand torch.


Disclaimer: "Units and accessories may not be exactly as pictured"