PowerPlasma 60S - MOVING SALE

PowerPlasma 60S - MOVING SALE

Regular Price: CA$1,350.00

Special Price: CA$1,100.00

Availability: Out of stock

Click on above image to view full picture

Make a list of everything you want in a plasma cutter.  Chances are that you'll come up with a list that matches up pretty closely to the list of features of the Everlast PowerPlasma 60S.  It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop.  The PowerPlasma 60S is built on an inverter platform, making use of IGBT modules from Infineon (Siemens) to reduce weight, and improve reliability and performance over the individual IGBT design.   The unit has plenty of cut capacity with a recommended 9/16" daily cut, a 3/4" clean cut ,1" severance cut and up to 3/8" CNC.  The new iPT 60 torch (4m) is part of the standard package and features a proven long life Italian design with blow back start, pilot arc and a variety of consumable choices.  The PowerPlasma 60S features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.


Features & Benefits:

  • IGBT Inverter Plasma Cutter
  • Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
  • Cuts virtually any type of metal with ease
  • 60% Duty cycle at 60 amps
  • iPT 60 Torch
  • Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
  • Pilot arc improves performance and cutting on dirty, painted, or rusted metals 
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of continuous operation
  • Front air pressure gauge allows quick verification of air pressure
  • Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
  • Adjustable postflow timer for maximum consumable life
  • CNC socket for CNC use on plasma tables (machine torch optional)
  • NOTE: When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD)

Recommended Areas of Use: 

  • Home shop
  • Automotive/muffler shops
  • Motorsports
  • Farm/Ranch
  • Commercial fabrication
  • Factory maintenance
  • Pipelines
  • HVAC
  • CNC up to 3/8"

Recommended Metals: 

  • Steel
  • Stainless
  • Aluminum
  • Copper
  • Titanium
  • Nickel/Nickel alloys
  • Virtually any metal including cast iron

Standard Equipment:

  • iPT 60 hand held torch (4m) with Euro quick-connect central adapter
  • Work clamp with DINSE connector
  • Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
  • Consumable starter kit

Optional Equipment:

  • Welding cart
  • Welder Cover
  • Consumable kit

Minimum/Maximum:

  • Up to 9/16" daily use @ 15-20 ipm
  • Up to 3/4" clean cut @ 8-12 ipm
  • Up to 1" severance cut @ 3-5 ipm
  • Up to 3/8" CNC cut

Plasma cutting capacity is affected by several factors. 

Ideal cutting conditions require dry air, new consumables, proper air pressure, etc.  

Quality of cut depends upon consumable orifice size, standoff height, and travel speed.

Tech Specs
Type: 
IGBT
Voltage/phase: 
220/240 V 1 Phase
Output Amp/Volt Range: 

20-60A; 88-104V


OCV: 

240V


Max Inrush ( I1MAX ) Amps: 

41A


Maximum Rated (I1EFF ) Input Amps: 

32.4A


Duty Cycle At Rated Amps/Volts: 
  • 60% @ 60A/104V

  • 100% @ 50A/100V

Arc Start Type: 
Blow Back (Piston type)
PilotArc: 
Yes
Weight: 58 lb
Torch Type: 

Italian designed iPT 60


CNC Interface Port: 

Yes


Adjustable Post Flow Timer: 
Yes
Gouging: 
Light to Medium
Recommended Cutting Air Pressure: 

75 psi


Recommended Compressor Capacity: 

6CFM @ 90 psi/ 30 gallon tank


OK-to-Cut Indicator/Low Air pressure safety: 
Yes

Product Notes:


To improve consumable life and prevent torch damage, the customer must supply and install a separate air dryer inline in addition to the regulator/water trap supplied by Everlast. The water trap Everlast supplies with the unit is not designed to remove all moisture from the air.

Disclaimer: "Units and accessories may not be exactly as pictured"