PowerPlasma 80S MOVING SALE

PowerPlasma 80S MOVING SALE

Regular Price: CA$1,500.00

Special Price: CA$1,250.00

Availability: In stock

Click on above image to view full picture

If you are looking for a professional level machine that you won't out grow as your business expands, the Everlast PowerPlasma 80S is likely the one that you'd choose.  The portability, power, and performance, combine with the price to make the PowerPlasma 80S  one of the best choices available in it's class.  On power alone, the unit shines.  The severance capacity for the 80 amp IGBT inverter plasma cutter is rated up to 1 1/4" with a clean cut rating up to 7/8".   For routine daily use, the unit is recommended for cutting 3/4" thick plate metal.  Considering price, the unit is in a class all by itself, with a price tag under $1400.00    On portability, the units size is compact and can be easily picked up and carried right to where the work needs to be done.  The iPT 80 torch is rugged and features improved consumable life.  This blowback design torch comes with a variety of consumable choices, shielded and unshielded.   There's not much in most shops that this plasma cutter isn't capable of handling.  True it has a professional feel, capability and performance, but it also offers something for the hobbyist, with standard 240V operating input, which makes it right at home in any well equipped home shop or garage.


Features & Benefits:

  • IGBT Inverter Plasma Cutter
  • Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
  • Cuts virtually any type of metal with ease
  • Commercial class, 60% Duty cycle at 80 amps
  • iPT 80 torch (4m)
  • Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
  • Pilot arc improves performance and cutting on dirty, painted, or rusted metals 
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation
  • Adjustable post flow control up to 60 seconds to improve consumable and torch life
  • Front air pressure gauge allows quick verification of air pressure
  • Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
  • CNC socket for CNC use on plasma tables for cuts up to 7/16" (machine torch optional)

Recommended Areas of Use: 

  • Home shop
  • Automotive/muffler shops
  • Motorsports
  • Farm/Ranch
  • Commercial fabrication
  • Factory maintenance
  • Shipyards
  • Pipelines
  • HVAC
  • CNC up to 7/16"

Recommended Metals: 

  • Steel
  • Stainless
  • Aluminum
  • Copper
  • Titanium
  • Nickel/Nickel alloys
  • Virtually any metal including cast iron

Standard Equipment:

  • 4m iPT 80  hand held torch with Euro quick-connect central adapter
  • Work clamp with DINSE connector
  • Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
  • Consumable starter kit

Optional Equipment:

  • Welding cart
  • Welder Cover
  • Consumable kit

Minimum/Maximum:

  • Up to 3/4" daily use @ 15-20 ipm
  • Up to 1" clean cut @ 8-12 ipm
  • Up to 1 1/4" severance cut @ 3-5 ipm

Plasma cutting capacity is affected by several factors. 

Ideal cutting conditions require dry air, new consumables, proper air pressure etc.  

Quality of cut depends upon consumable orifice size, standoff height,  and travel speed.

Tech Specs
Type: 
IGBT
Voltage/phase: 
220/240 V 1 Phase
Output Amp/Volt Range: 

20-80A/88V-112V

OCV: 

230

Max Inrush ( I1MAX ) Amps: 
  • 58.3 A
Maximum Rated (I1EFF ) Input Amps: 
  • 45.2 A
Duty Cycle At Rated Amps/Volts: 
  • 60% @ 80A/112V
  • 100% @ 60A/105V
Arc Start Type: 
Blow Back (Piston type)
PilotArc: 
Yes
Torch Type: 

Italian designed iPT 80 torch

CNC Interface Port: 

Yes

 

Adjustable Post Flow Timer: 
Yes
Gouging: 
Light to Medium
Recommended Cutting Air Pressure: 

65-75psi

Recommended Compressor Capacity: 

7CFM @ 90 psi/60 gallon tank

OK-to-Cut Indicator/Low Air pressure safety: 
Yes
Amps/Volts @ 60% Duty Cycle: 

80A/ 112V

Product Notes:


A separate inline air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture.

Disclaimer: "Units and accessories may not be exactly as pictured"