PowerARC 200STi
The PowerARC 200STi with 200 amps of DC Stick/Live Lift TIG welding power is a compact, digitally controlled IGBT inverter welder that packs a punch. The unit has E6010 welding capability with the push of a soft button on the front panel.(Short Arc) For excellent low spatter arc performance on E7018, E7024, E7014 and even stainless class electrodes the unit has another connector port for all other welding rods. In both the 6010 and standard operating modes, the unit features adjustable hot start and adjustable arc force control. The basic DC Live Lift TIG capability of this unit also allows the unit to perform well on steel and stainless applications. The PowerArc 200STi is 120V/240V dual voltage. Be sure to pick up a gas valve TIG torch and gas regulator if you want to TIG weld with this unit. Check out our 17V series TIG torch and gas regulator located in our accessories section which are ideal for this unit if you need to use the TIG function.
| Features & Benefits | Features & Benefits:
|
|---|---|
| What's Included | Standard Equipment:
|
| Tech Specs | Tech Specs IGBT Type:
Individual IGBT
Inverter Type:
Analog
Output Type:
DC Stick, DC TIG
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps:
Max Rated Stick Amps:
TIG Amps @ Rated Duty Cycle:
120V:
240V:
Stick Amps @ Rated Duty Cycle:
120V:
240V:
Max Inrush ( I1MAX ) Amps:
110V: 39.2A Maximum Rated (I1EFF ) Input Amps:
110V: 24A OCV:
TIG/Stick 70V TIG Output Range DC:
Stick Output Range DC:
Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Adjustable Hot Start
6010/Cellulose Capable:
Yes (Short Arc)
Minimum Amp DC TIG Start:
10A TIG Start Type:
Live Lift TIG Foot Pedal:
None/Not Applicable
|
| Minimum Maxmimum | Minimum/Maximum:Stick
TIG*:
*Not for welding Aluminum or Magnesium. Min/Max TIG is based off of industry standard practice for best quality welds. |
| Optional Equipment | Optional Equipment:
|
| Notes | Product Notes: 1) The PowerARC 200STi comes with the stick holder and work clamp. 2) The Gas valve TIG torch is optional. 3) This unit does not support a foot pedal. 4) This unit is DC output only and is not designed to weld aluminum in TIG mode. This unit needs a minimum 5500 watts (120V) and 9000 wats (240v) to operate properly. Use with generators certified as clean power by the generator manufacturer (10% total harmonic distortion). Damage cause by operating on generators that are not the proper size and type are not warrantied. French manual currently NOT available. English Manual can be downloaded online. |