PowerARC 300ST
The PowerARC 300ST is built with the professional in mind. The PowerArc 300ST offers 300 amps of DC Stick/Lift TIG welding power. This compact IGBT inverter welder cuts no corners on performance or design. The unit has E6010 welding capability with a dedicated 6010 port on the front panel, (Short Arc) For excellent low spatter arc performance on E7018, E7024, E7014 and even stainless class electrodes the unit has another connector port for all other welding rods. The basic DC Lift TIG capability of this unit also allows the unit to perform well on steel and stainless applications. The stick hot start and arc force control adjustments allow you to tailor the arc to perform just as you need it, and work better out of position when close arc gaps are required. The PowerArc 300ST is 240V single phase. Be sure to pick up a gas valve TIG torch and gas regulator if you want to TIG weld with this unit. Check out our 17V series TIG torch and gas regulator located in our accessories section which are ideal for this unit if you need to use the TIG function.
| Features & Benefits | Features & Benefits:
|
|---|---|
| What's Included | Standard Equipment:
|
| Tech Specs | Tech Specs IGBT Type:
Individual IGBT
Inverter Type:
Analog
Output Type:
DC Stick, DC TIG
Voltage/phase:
DUAL VOLTAGE 220/240V 1 PHASE
Max Rated TIG Amps:
Max Rated STICK Amps:
TIG Amps @ Rated Duty Cycle:
Stick Amps @ Rated Duty Cycle:
Max Inrush ( I1MAX ) Amps:
220V: 60A Maximum Rated (I1EFF ) Input Amps:
220V: 46.8A OCV:
70V Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Adjustable Hot Start
6010/Cellulose Capable:
Yes (Short Arc)
Minimum Amp DC TIG Start:
20A TIG Start Type:
Lift Start Only TIG Start Type:
Lift Start only
Foot Pedal:
None/Not Applicable
|
| Minimum Maxmimum | Minimum/MaximumStick:
TIG:
|
| Optional Equipment | Optional Equipment:
|
| Notes | Product Notes: 1) The PowerARC 300ST comes with the stick holder and work clamp. 2) The Gas valve TIG torch is optional. 3) This unit does not support a foot pedal. 4) This unit is DC output only and is not designed to weld aluminum in TIG mode. This unit is not designed for welding light gauge materials and does not support a foot pedal. Ideal for welding 16 gauge or thicker steel and stainless. Not suitable for welding aluminum in TIG mode. The start is Lift TIG only for TIG operation. TIG torch and regulator not included. If used with a generator, the generator must be rated by the manufacturer of the generator as "Clean Power". This is normally considered to be <5% THD. Use with a generator rated with at least 15,000 surge watt capability (Single phase). |
