PowerTIG 210EXT
The benefits of the PowerTIG 210EXT digital microprocessor are numerous, it helps increase productivity and and weld quality. The Everlast PowerTIG 210EXT allows you to make precise settings and fine tune them to the exact standards required. This TIG/Stick welder from Everlast also features IGBT inverter technology which offers the best in arc stablity and performance while reducing size and weight. The unit features wave form control with three distinct wave forms: Advanced Square wave, Soft Square wave and Triangular that offer flexibility while welding aluminum. The Everlast PowerTIG 210EXT features programmable memory, adjustable AC Frequency, and adjustable AC balance control. The stick welder function features adjustable hot start and arc force control for maximum welding flexibility. The PowerTIG 210EXT features two pulse modes, standard and advanced pulse. In the advanced pulse mode the welder oscillates between AC and DC polarity allowing fine fast freeze control on thin gauge aluminum, and greater penetration on thick plate aluminum. The Everlast PowerTIG 210EXT may seem quite complex with its list of features, but it is really quite simple because of the intuitive design which leads to quick and easy setup whether you are a welding professional or just an enthusiast.
| Features & Benefits | Features & Benefits:
NOTE: When used with a generator, the generator must be certified by its manufacturer to produce "clean" power. 5% or less Total Harmonic Distortion (THD) |
|---|---|
| What's Included | Standard Equipment:
|
| Tech Specs | IGBT Type:
Module IGBT
Inverter Type:
Digital/Micro-controlled
Output Type:
AC/DC TIG, DC Stick
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps:
210 A Max Rated Stick Amps:
160A TIG Amps @ Rated Duty Cycle:
Stick Amps @ Rated Duty Cycle:
@120V:
@ 240V:
Max Inrush ( I1MAX ) Amps:
Maximum Rated (I1EFF ) Input Amps:
OCV:
TIG Output Range DC:
TIG Output Range AC:
Stick Output Range DC:
Stick Hot Start Amps:
0-100% Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Adjustable Hot Start
Stick Hot Start Time:
0-2 Seconds 6010/Cellulose Capable:
Yes (Short Arc) Limited to 6011
Minimum Amp DC TIG Start:
5A Minimum Amp AC TIG Start:
5A TIG Start Type:
HF and Lift Start
Memory:
Yes
Start Amp Range:
120V:
240V:
End Amp Range:
120V:
240V:
Upslope Time:
0-25 Seconds Down Slope Time:
0-25 Seconds Preflow time:
0-25 Seconds Post Flow Time:
0-50 Seconds TIG Pulse:
Yes
Standard DC Pulse Frequency:
.1-500 Hz Standard AC Pulse Frequency:
.1-250 Hz Advanced Square Wave .1-10 Hz Soft Square, Triangular AC Advanced Pulse Frequency:
.1-10 Hz Pulse Time On (Duty Cycle):
5-100% Pulse Amp Range:
5-99% of Welding Amps AC Frequency (Hz):
20-250 Hz AC Balance Range:
5-90% of EP (+) AC Wave Forms:
Remote Control:
2T/4T with Torch Amptrol settings
Foot Pedal:
NOVA
|
| Minimum Maxmimum | Minimum/Maximum:TIG:
Stick:
|
| Optional Equipment | Optional Equipment:
|
| Notes | Product Notes: For generator use: Use only generators that are certified as "clean power" by the manufacturer. This means that the unit has |
