PowerARC 141STL

PowerARC 141STL
CA$475.00

Availability: In stock

Click on above image to view full picture

The Everlast PowerARC 141STL is a digitally controlled, dual voltage 140 amp DC ONLY stick and TIG (Lift TIG) welder that is light and portable and is ideal for making repairs and doing daily welding chores around the shop.  The IGBT inverter design of the PowerARC 141STL provides a stable arc with features such as intuitive anti-stick function, adjustable hot start and arc force control, VRD and low 5 amp start for TIG users. As well, Live Lift and Lift start are available for TIG welding, with included TIG torch. All you need is an argon regulator and you're set to TIG weld.

Features & Benefits:

  • IGBT Stick,Live Lift and Lift start TIG
  • Digital display for precise current setting
  • 140 amp max output at 220V, DC ONLY
  • 5 amp minimum
  • 120V/240V Dual Voltage

Recommended Areas of Use: 

  • Home/Hobby garage
  • Maintenance shop
  • Motor Sports/Off-Road
  • Fabrication/ Prototyping
  • Portable Welding Repair
  • Automotive Repair

Recommended Metals: 

  • Steel
  • Stainless
  • Chrome Moly
  • Cast Iron

Standard Equipment:

  • Electrode Holder with 3m cable
  • Work Clamp with 3 m cable
  • 3 m   Everlast 17 series TIG torch with trigger switch
  • Consumable Starter Kit (Tungsten not included)
  • Impact resistant carry case

Optional Equipment:

  • Welding Cart
  • Argon Regulator
  • Foot pedal
  • Specialized consumables kits

Minimum/Maximum:

Stick:

Weld with a maximum of 1/8" diameter electrode depending on type. Weld with a minimum of 1/16" diameter electrode

TIG*

Minimum 20 gauge. Maximum 1/8" (Single Pass) and 3/8" (Multi-Pass, practical limit)

*Unit is not intended for use with Aluminum or Magnesium

IGBT Type: 
Individual IGBT
Inverter Type: 
Digital/Micro-controlled
Output Type: 
DC Stick, DC TIG
Voltage/phase: 
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps: 
  • @120V:  80A
  • @240V:  140A
Max Rated Stick Amps: 
  • @120V: 80A
  • @240V: 140A
TIG Amps @ Rated Duty Cycle: 

120V:

  • 80A/23.2V @ 35% Duty Cycle/ 40º C
  • 65A/22.6V @ 60% Duty Cycle/ 40º C
  • 50A/22V @ 100% Duty Cycle/ 40º C

240V:

  • 140A/25.6V @ 35% Duty Cycle/ 40º C
  • 110A/24.4V @ 60% Duty Cycle/ 40º C
  • 85A/23.2V @ 100% Duty Cycle/ 40º C

 

Stick Amps @ Rated Duty Cycle: 

120V:

  • 80A/23.4V @ 35% Duty Cycle/ 40º C
  • 65A/22.6V @ 60% Duty Cycle/ 40º C
  • 50A/22V @ 100% Duty Cycle/ 40º C

240V:

  • 140A/25.6V @ 35% Duty Cycle/ 40º C
  • 110A/24.4V @ 60% Duty Cycle/ 40º C
  • 85A/23.4V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps: 

110V: 28.1A
220V: 24.2A

Maximum Rated (I1EFF ) Input Amps: 

110V: 17.0 A
220V: 15.0A

OCV: 

70V

TIG Output Range DC: 
  • 120V: 15A-80A
  • 240V: 5A-140A
Stick Ouput Range DC: 
  • 120V:  5A-80A
  • 1240V: 5A-140A

Stick Hot Start Amps: 
0-100%
Stick Function: 
Adjustable Arc Force Control
Stick Hot Start Type: 
Adjustable Hot Start

Stick Hot Start Time: 
0-2 Seconds


6010/Cellulose Capable: 
NO
Minimum Amp DC TIG Start: 

5A

TIG Start Type: 

Live and Lift TIG with switch

Down Slope Time: 
0-5 seconds
Post Flow Time: 
0-10 seconds
Foot Pedal: 
None/Not Applicable

Product Notes:


1) Use only with generators that are certified as clean power (5% total harmonic distortion) by the generator manufacturer. Use with at least 3500 watt generator for 120V use, and a 6500 watt generator for 240V use. Damage to units caused by underrated, or "dirty" power generators is not covered under warranty.


2) This unit is DC output only. It is not designed to weld Aluminum.


3) Specifications and accessories subject to change without notice.


4) If you purchase the optional pedal, adjust amperage before you plug the pedal in since otherwise, the adjustment will not be reflected in the digital display.


5) Argon Regulator for TIG welding is not included.

Disclaimer: "Units and accessories may not be exactly as pictured"