PowerTIG 210EXT - MOVING SALE

PowerTIG 210EXT - MOVING SALE

Regular Price: CA$2,450.00

Special Price: CA$2,100.00

Availability: In stock

Click on above image to view full picture

The benefits of the PowerTIG 210EXT digital microprocessor are numerous, it helps increase productivity and and weld quality. The Everlast PowerTIG 210EXT allows you to make precise settings and fine tune them to the exact standards required.  This TIG/Stick welder from Everlast also features IGBT inverter technology which offers the best in arc stablity and performance while reducing size and weight.  The unit features wave form control with three distinct wave forms: Advanced Square wave, Soft Square wave and Triangular  that offer flexibility while welding aluminum. The Everlast PowerTIG 210EXT features programmable memory, adjustable AC Frequency, and adjustable AC balance control.  The stick welder function features adjustable hot start and arc force control for maximum welding flexibility.  The PowerTIG 210EXT features two pulse modes, standard and advanced pulse.  In the advanced pulse mode the welder oscillates between AC and DC polarity allowing fine fast freeze control on thin gauge aluminum, and greater penetration on thick plate aluminum.   The Everlast PowerTIG 210EXT may seem quite complex with its list of features, but it is really quite simple because of the intuitive design which leads to quick and easy setup whether you are a welding professional or just an enthusiast.

Features & Benefits:

  • Microprocessor control offers precise management of welding parameters and functions
  • Offers standard type pulse feature for AC and DC, and a special Advanced Pulse for AC for welding thin material
  • Wave form control offers 3 types of wave form for AC welding: Triangular Wave, Advanced Square Wave, and Soft Square Wave
  • Programmable Memory allows user to save parameters for up to 9 different programs
  • HF or Lift Arc capability in AC or DC modes
  • Offers programmable Stick functions which include hot start time, hot start intensity and arc force control.
  • NOVA Foot pedal

NOTE: When used with a generator, the generator must be certified by its manufacturer to produce "clean" power. 5% or less Total Harmonic Distortion (THD)

Recommended Areas Of  Use:

  • Fabrication/Manufacturing
  • Maintenance/HVAC
  • Construction
  • Farm/ Ranch
  • Motorsports/Off road
  • Hobby/Welding Enthusiast
  • Educational/Instructional

Recommended Metals:

  • Steel
  • Stainless
  • Aluminum
  • Copper
  • Titanium

Standard Equipment:

  • 7.5m  Everlast 26 series (air cooled)TIG torch with remote switch and 35 series DINSE style connector
  • 7.5m  Everlast 9 series (air cooled) TIG  torch with remote switch and 35 series DINSE style connector
  • Heavy duty Stick electrode holder with 3m cable and 35 series DINSE connector
  • NOVA Foot pedal
  • Work Clamp with 3m cable and series 35 Dinse style connector
  • Brass Argon regulator
  • 1.5m power input cable with NEMA 6-50 Plug
  • Consumable Starter Kit (Tungsten not included)

Optional Equipment:

  • Water cooler
  • Welder Cover
  • Amperage Slide Control
  • Gas Lens Consumable Kit with tungsten
  • Stubby Consumable Kit with tungsten
  • Everlast Series Torches: WP9, 17, 18, 20, 26 Flex head torch and flex cables. Available in 4m or 8m
  • Everlast Series Torches: WP9, 17, 20, Rotating head torch and flex cables 4m
  • RotaFlex Rotating Head Gas Lens TIG Kit (Kit is compatible with both the WP9 and WP26 torches)

Minimum/Maximum:

TIG:

  • Weld steel to a maximum of 5/16" single pass
  • Weld Steel to a maximum of 3/4" multi-pass
  • Weld Aluminum to a maximum of 1/4" single pass
  • Weld aluminum to a maximum of 5/8" multi-pass
  • Weld to a minimum of .007" Steel
  • Weld to a minimum of .008" Aluminum

Stick:

  • Weld with a minimum of 1/16" diameter electrode
  • Weld with a maximum of 1/8" diameter electrode
IGBT Type: 
Module IGBT

Inverter Type: 
Digital/Micro-controlled
Output Type: 
AC/DC TIG, DC Stick
Voltage/phase: 
DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps: 

210 A

Max Rated Stick Amps: 

160A

TIG Amps @ Rated Duty Cycle: 

  • @120V:  125A/15V @ 60% Duty Cycle/ 40° C
  • @240V: 210A/18.4V @ 60% Duty Cycle/ 40° C
Stick Amps @ Rated Duty Cycle: 

@120V:

  • 100A/24V @ 60% Duty Cycle/ 40° C
  • 80A/23.2V @ 100% Duty Cycle/40° C

@ 240V: 

  • 160A/26.4V @ 60% Duty Cycle/ 40º C
  • 130A/25.2V @100% Duty Cycle/40°
Max Inrush ( I1MAX ) Amps: 
  • @120V:  27A
  • @240V: 31A
Maximum Rated (I1EFF ) Input Amps: 
  • @120V: 22A

  • @240V:25A

OCV: 
  • 70V/<24V with VRD
TIG Output Range DC: 
  • 120V: 3A-120A/10.1V-15V
  • 240V: 3A-210A/ 10.1V-18.4V

TIG Output Range AC: 
  • 120V: 5A-120A/10.2V-15V
  • 240V:  5A-210A/10.2V-18.4V
Stick Output Range DC: 
  • 120V: 20A-100A/20.8V-24V
  • 240V:  20A-160A/20.8V-26.4V

Stick Hot Start Amps: 

0-100%

Stick Function: 
Adjustable Arc Force Control
Stick Hot Start Type: 

Adjustable Hot Start
Stick Hot Start Time: 

0-2 Seconds

6010/Cellulose Capable: 
Limited to 6011
Minimum Amp DC TIG Start: 

5A

Minimum Amp AC TIG Start: 

5A

TIG Start Type: 
HF and Lift Start
Memory: 
Yes

Start Amp Range: 

120V:

  • DC: 5-120A

  • AC: 5-120A

240V:

  • DC: 5-210A
  • AC: 5-210A
End Amp Range: 

120V:

  • DC: 3-120A
  • AC: 5-120A

240V:

  • DC: 3-210A
  • AC: 5-210A
Upslope Time: 

0-25 Seconds

Down Slope Time: 

0-25 Seconds

Preflow time: 

0-25 Seconds


Post Flow Time: 

0-50 Seconds


TIG Pulse: 
Yes
Standard DC Pulse Frequency: 

.1-500 Hz


Standard AC Pulse Frequency: 

.1-250 Hz Advanced Square Wave

.1-10 Hz Soft Square, Triangular

AC Advanced Pulse Frequency: 

.1-10 Hz


Pulse Time On (Duty Cycle): 

5-100%


Pulse Amp Range: 

5-99% of Welding Amps

AC Frequency (Hz): 

20-250 Hz

AC Balance Range: 

5-90% of EP (+)

AC Wave Forms: 
  • Advanced Square Wave
  • Soft Square Wave
  • Triangular

Remote Control: 
2T/4T with Torch Amptrol settings

Foot Pedal: 
NOVA

Product Notes:


For generator use:  Use only generators that are certified as "clean power" by the manufacturer.  This means that the unit has <10% total harmonic distortion (THD).   For best results, when operating on 120V power, use a generator capable of  at least 3500 continuous watts.   For operation on 240V, use a generator that is rated for 8000 continuous watts or greater.

Disclaimer: "Units and accessories may not be exactly as pictured"