Search results for: '함평모텔출장,출장아가씨,【skyanma.com】,광주여대생출장,평택출장안마,군포24시안마,완주후불제출장안마,포천후불제출장안마,부평출장안마,신안출장마사지'

• New Bezel and stackable feature!
• 100 Amps of professional cutting power
• Rugged IGBT construction
• Blow-back start technology
• Pilot Arc
• CNC Port
• 6.5m iPT100 torch

• New!  This cart is designed specifically for the PowerMTS 275 Lightning & WC400 Combo ONLY
• Rear panel accommodates full size gas tank and includes adjustable safety chain restraint
• Low compact profile
• Heavy duty wheels allow for easy push and pull around your shop
• Top carry handle on the unit is removed to accept the capture bar on top
• Please refer to other Carts and/or speak with a representative to best match your unit with a cart
  

• SL9F Flex Neck Torch
• 4m Cable (13 feet)
• Straight handle, flex neck design
• Air cooled
• 4m Rated: 100 Amps DC, 90 Amps AC @ 100% duty cycle
• Rated for a 30° bending radius
• 2T/4T remote switch included (finger switch).
• Silicone based rubber compound
• Denim Sleeve Included

• SL9F Slim Line Flex Neck torch
• 8m
• Slim handle, flex neck design
• Air cooled 
• Rated: 100A (DC) / 90A (AC) @ 60% duty cycle
• Rated for a 30° bending radius
• 2T/4T remote switch included (finger switch).
• Silicone based rubber compound
• Denim Sleeve Included

Torch Switch On/Off - 4m

Works on soft-faced newer Everlast TIG units.

• 7-pin Switch with FEMALE plug, for PowerArcs, PowerTIGs, TIG/Plasma combos.
• Fits all Everlast units with 7-pin MALE connector on the front panel.
• Spare switch for TIG torches.
• Does not fit MTS units

Torch Switch On/Off - 8m

Works on soft-faced newer Everlast TIG units.

• 7-pin Switch with FEMALE plug, for PowerArcs, PowerTIGs, TIG/Plasma combos.
• Fits all Everlast units with 7-pin MALE connector on the front panel.
• Spare switch for TIG torches.
• Does not fit MTS units

• Compact IGBT inverter design for maximum performance
• Adjustable Hot Start to improve arc starting and reduce sticking
• Adjustable Arc Force Control to maximize arc performance
• Smooth, stable arc with any type electrode
• DC lift TIG function adds versatility for welding Steel, and Stainless
• Dedicated E6010 setting for optimized performance with cellulose based rods (Short Arc)
• Industrial class duty cycle of 60% @ 300 Amps

Need To Know:

• MIG, Stick and Plasma Cutter All-In-One 
• 200A MIG, 160A Stick, 40A Plasma
• Easy to Read LCD screen
• Compact, easy to carry case
• 35% Duty Cycle at Max. Output
• Dual Voltage 120/240V Input
• Spool Gun Capable
• Arc Force and Hot Start Control For Stick
• MIG Inductance Control
• AK15 MIG Gun installed with a Blue STEEL Liner for wire/tip sizes 0.6/0.8mm (.023/0.030") (subject to change)
• PowerSet Mode for True Synergic Operation
• Digital Display Screen
• 4" and 8" Spool Capacity (2 to 12 lbs)
• Flux-Core Setting
• Cut up to 1/2" clean cut, Severe up to 5/8"+
• (S45 Consumables)
• Stick Weld with up to 1/8" to 5/32" Electrode

Work with all EVERLAST MIG and MIG Combo units  

• 0.9mm - 1.2mm Flux Core (Knurled) Roller
• NOTE: Power I-MIG 230i, 275P, 253DPi and MTS 251Si & 275Lightning require 2 rollers

• 0.9mm - 1.2mm ALUMINUM Roller
• Fits All Everlast MIG and MIG Combo Welders
• NOTE: Power I-MIG 230i, 275P, 253DPi and MTS 251Si & 275Lightning require 2 rollers

Please check with your unit to see how many Rollers you will require.

Work with all EVERLAST MIG and MIG Combo units  

• 0.9mm - 1.2mm Steel Roller
• NOTE: Power I-MIG 230i, 275P, 253DPi and MTS 251Si & 275Lightning require 2 rollers

• Equipped with LCD Display
• Complete update for ease of use.
• Special Features include: PowerSet Mode- Selection of Gas Type, Wire Diameter, Thickness/Thinness of Material
• AK15 MIG Gun installed with a Blue STEEL Liner for wire/tip sizes 0.6/0.8mm (.023/0.030") (subject to change)
• Spool Gun ready. (Not Included)
• Stick with optional electrode holder
• 100% Duty Cycle at 60A @120V,  90A@240V
• Up to a 8" spool (12 lbs)
• Euro-Quick Connect 15 series gun
• 120V/240V Dual voltage
• Fixed Preflow and Post flow

• Equipped with LCD Display
• Complete update for ease of use.
• Special Features include: PowerSet Mode- Selection of Gas Type, Wire Diameter, Thickness/Thinness of Material.
• AK15 MIG Gun installed with a Blue STEEL Liner for wire/tip sizes 0.6/0.8mm (.023/0.030") (subject to change)
• 120V input IGBT inverter
• Spool Gun Capable
• 140 Amps Maximum Output
• 25% Duty Cycle at 140 Amps
• .023"-.030" Wire diameter
• Stepless adjustment
• 4" or 8" spool (2-12 lbs)
• Euro-Quick Connect for MIG gun
• Uses common 15 Series MIG gun consumables

• SL20F Slim Line Flex Neck torch
• 8m
• Slim handle, flex neck design
• Water cooled 
• Rated: 250A (DC) / 175A (AC) @ 100% duty cycle
• Rated for a 30° bending radius
• 2T/4T remote switch included (finger switch).
• New! silicone tube
• New! hose guard at connector
• Denim Sleeve Included

• SL20F Flex Neck Torch
• 4m
• Straight handle, flex neck design
• Water cooled
• 4m Rated: 250 Amps DC, 175 Amps AC @ 100% duty cycle
• Rated for a 30° bending radius
• 2T/4T remote switch included (finger switch).
• Silicone based rubber compound
• Denim Sleeve Included

SL26 Slim Line Flex Neck Torch - 8m

• Slim handle and flex neck design
• Air Cooled
• 8m Length
• 200A (DC) / 160A (AC) @ 60% Duty Cycle
• Rated for a 30° bending radius
• Dinse 35-50 style connector
• Silicone based rubber compound
• Denim Sleeve Included

SL26 Slim Line Flex Neck Torch

• Slim handle and Flex neck design
• Air Cooled
• 4m Length
• 200A (DC) / 160 (AC) @ 60% Duty Cycle
• Rated for a 30° bending radius
• Dinse 35-50 style connector
• Silicone based rubber compound
• Denim Sleeve Included

• Slim handle with flex neck design
• Water Cooled
• 8m length
• Rated for a 30° bending radius
• Rated 300A (DC) / 250A (AC) @ 100% Duty Cycle
• Dinse style connector 35-50
• Strain Relief on end cable
• Denim Sleeve Included

• New: Flex Neck Design
• 4m Cable (13 feet)
• Water Cooled
• Rated: 250A (AC) / 300A (DC)
• Rated for a 30° bending radius
• 2T/4T remote switch included (finger switch)
• Slim handle for more control
• Comfortable with less cramping
• Lighter and ergonomically designed
• Denim Sleeve Included.

• Slim handle with flex neck design
• Air Cooled
• Rated for a 30° bending radius
• 8m, 150A (DC) / 120A (AC) @60% Duty Cycle
• Dinse style connector 35-50
• Denim Sleeve Included