Mig Guns & Accessories

• 60% Duty cycle at 500A CO2 or 350A Mixed Gas
• 3m cable
• water cooled and compatible with Everlast PowerCool W300
• Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design
• easily adjusts stick out of electrode
• Takes AK36 Tips and Nozzle
• Requires AK500 Ceramic Diffusers & Tip Holder

• 60% Duty cycle at 500A CO2 or 350A Mixed Gas
• 5m cable
• water cooled and compatible with Everlast PowerCool W300
• Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design
• easily adjusts stick out of electrode
• Takes AK36 Tips and Nozzle
• Requires AK500 Ceramic Diffusers & Tip Holder

• AK15, 3m MIG gun
• Quick connect
• 180A CO2/150A Mixed CO2/Ar @ 60% Duty Cycle

• 3m cable, air cooled-Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design, easily adjusts stick out of electrode
• Compatible with Power i-MIG 140E, 200

• 180A CO2/150A Mixed CO2/Ar @ 60% Duty Cycle

• 5m cable, air cooled-Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design, easily adjusts stick out of electrode
• Compatible with Power i-MIG 140E, 200

• 250A CO2/220A Mixed CO2/Ar @ 60% Duty Cycle

• 3m cable, air cooled-Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design easily adjusts stick out of electrode
• Compatible with Power i-MIG 200, i-MIG 275P, i-MIG 230, MTS 211, MTS 251, MTS 221

• 250A CO2/220A Mixed CO2/Ar @ 60% Duty Cycle
• 5m cable
• air cooled
• Euro quick connect compatible
• Ergonomically designed-Twist off, slide on design
• easily adjusts stick out of electrode
• Compatible with Power i-MIG 200, i-MIG 275P, i-MIG 230, MTS 211, MTS 251, MTS 221

• 250A CO2/220A Mixed CO2/Ar @ 60% Duty Cycle
• 3m cable
• air cooled
• Euro quick connect compatible
• Ergonomically designed-Twist off, slide on design
• easily adjusts stick out of electrode
• Compatible with Power i-MIG 200, i-MIG 230, MTS 211, MTS 251, MTS 221

• 340A CO2/320A Mixed CO2/Ar @ 60% Duty Cycle
• 3m cable
• air cooled
• Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design
• Easily adjusts stick out of electrode

• 340A CO2/320A Mixed CO2/Ar @ 60% Duty Cycle
• 5m cable
• air cooled
• Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design
• Easily adjusts stick out of electrode

• PowerSpool Series
• For Power I-MIG welders and other brands with euro connectors
• GMAW (MIG)

• PowerSpool Series
• For Power MTS welders and other brands with euro connectors
• GMAW (MIG)

• 300 amps CO2/270 amps mixed @ 60% duty cycle
• .030" - .045" wire diameter drive rolls available.
• Roll diameter max: 4" - AK36 series consumable
• Recommended for use with Power i-MIG 230i, 275S, 275P and PowerMTS 251Si
• Not for use with Power i-MIG 140E, 200, 210, MTS211Si
• Speed Control in Handle (Note: Speed Control does not work on Standard MIG Units, this feature will only work on MTS and Power I-MIG 230i and 275P)
• 6 Metre Whip.

• Ergonomic design for operator comfort
• Euro style quick connectors allow gun change out in seconds
• 6 month warranty
• AK36 Consumables
• Capable with: Power I-MIG 253DPi and Power I-MIG 275P ONLY.
• Equipped with a 1.2mm Roller

Fits All Everlast MIG and MIG Combo Welders

• 0.6mm - 0.8mm Steel Roller
• NOTE: Power I-MIG 230i, 275P, 253DPi and MTS 251Si & 275Lightning require 2 rollers

Work with all EVERLAST MIG and MIG Combo units  

• 0.8mm - 1.0mm Steel Roller
• NOTE: Power I-MIG 230i, 275P, 253DPi and MTS 251Si & 275Lightning require 2 rollers

Work with all EVERLAST MIG and MIG Combo units  

• 0.9mm - 1.2mm Steel Roller
• NOTE: Power I-MIG 230i, 275P, 253DPi and MTS 251Si & 275Lightning require 2 rollers

Work with all EVERLAST MIG and MIG Combo units  

• 1.0 mm - 1.2 mm Steel Roller
• NOTE: Power I-MIG 230i, 275P, 253DPi and MTS 251Si & 275Lightning require 2 rollers

Work with all EVERLAST MIG and MIG Combo units  

• 0.6mm - 0.8mm Flux Core (Knurled) Roller
• NOTE: Power I-MIG 230i, 275P, 253DPi and MTS 251Si & 275Lightning require 2 rollers

Work with all EVERLAST MIG and MIG Combo units  

• 0.8 mm - 1.0 mm Flux Core (Knurled) Roller
• NOTE: Power I-MIG 230i, 275P, 253DPi and MTS 251Si & 275Lightning require 2 rollers

Work with all EVERLAST MIG and MIG Combo units  

• 0.9mm - 1.2mm Flux Core (Knurled) Roller
• NOTE: Power I-MIG 230i, 275P, 253DPi and MTS 251Si & 275Lightning require 2 rollers